The CamTram system consists of a versatile Hi/Lo Hat attached to a plate designed for a multitude of mounting options. The Hi/Lo Hat can be used by itself or mounted to the precisely engineered dolly or Tram. The Tram features eight soft rubber tires mounted to an adjustable chassis with a passive rocker suspension system. The CamTram also features a quick and effective cable management system. It is designed to run on any set of ridged parallels that are 6 to 24 inches apart.
With the CamTram you supply the track. An ordinary extension ladder is an excellent choice because it easily accessible and quite ridged. Other examples of track are sets of 3/4" to 2" pipe or even two 2 by 4's nailed together. You could adapt it to dolly on a common banquet table or countertop. Alternatively you can leave off all the guide and clamp wheels and run it on the floor.
Key Features
Low center of gravity for smooth and safe operation
Hi/Low Hat with 100mm bowl mount; adjustable up to 7" with the 1" 2" and 4" risers
Four wheel sets (two wheels each corner) attached by Passive Rocker Suspension to insure maximum absorption of uneven surfaces
Adjustable tread pattern (1/3") per wheel
Precision ABEC-3 rated bearings in wheels for smooth starts and stops
Wheels can be adjusted from 6" to 24" apart via extruded spreaders to fit the track of your choice
The Hi Hat/camera mount can be placed anywhere within the extruded spreaders to accommodate your creative needs
Guide wheels are adjustable horizontally and vertically to accommodate straight and true operation on just about any track (CamTram is not recommend for curved track)
Adjustable clamp wheels make the Tram more secure to the track
Cable guides provided for quick and clean cable management
