Overview
The OConnor O-Focus DM Photo Pro Follow Focus Kit utilizes a new Hard Stop Handwheel, which has a transmission ratio of 1:1 (input:output). When coupled with the O-Focus Bridge, it yields a follow focus industry first; a 1:0.75 transmission ratio. This translates to longer, more exacting focus pulls when using limited barrel rotation still lenses for digital cinematography, and allows more precise lens control than has previously been available for these camera configurations. A small ratio change can make a big difference in terms of ‘feel’.
The hard stops enable the operator to set minimum and maximum focus points for lenses with unlimited rotation and to carry out hard focus stop pulls. To allow the focus-puller to react to unexpected movements, the unique single-hand-operated hard stop on/off switch, allows for instantaneous disengagement of the end stops for critical adjustments even during the shot.
This kit includes the following:
- C1242-1300 - O-Focus DM Main Bridge
- C1242-1100 - O-Focus Hard Stop Handwheel
- C1241-1540 - 15mm LWS Bridge
- C1242-1001 - Gear Friction Driver
- C1241-1600 - Gear .8 mod 43 Tooth 6mm Face
- C1241-1700 - Gear .8 mod 35 Tooth 10mm Face
- C1241-1800 - Gear .6 mod 50 Tooth 7.5mm Face
- C1241-1900 - Gear .5 mod 60 Tooth 7.5mm Face
- C1241-1530 - (10) Flat Studio Marking Disks
- C1241-1850 - Pelican Storm Case with Custom Foam Inserts
What's in the Box
- C1241-1850 - Pelican Storm Case with Custom Foam Inserts
- 10 x C1241-1530 - Flat Studio Marking Disk
- C1241-1900 - Gear .5 mod 60 Tooth 7.5mm Face
- C1241-1800 - Gear .6 mod 50 Tooth 7.5mm Face
- C1241-1700 - Gear .8 mod 35 Tooth 10mm Face
- C1241-1600 - Gear .8 mod 43 Tooth 6mm Face
- C1242-1001 - Gear Friction Driver
- C1241-1540 - 15mm LWS Bridge
- C1242-1100 - O-Focus Hard Stop Handwheel
- C1242-1300 - O-Focus DM Main Bridge
Specifications
Key Highlights
- Single-sided follow focus system
- Designed for still lenses
- 15mm LWS mounting option
- 1:0.75 transmission ratio
