Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the NTG-1 native 20Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimize light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
WSVM Wind shield
ZP1 Zip pouch
RM5 Mic clip
Acoustic Principle: Line Gradient
Directional Pattern: Super-Cardioid
Frequency Range: 20Hz ~ 20,000Hz (selectable HPF@80Hz)
Sensitivity: -36dB ±2dB re 1V/Pa @ 1kHz
Nominal Impedence: 50Ω
Equivalent Noise: 18dBA SPL (A - weighted per IEC651)
Maximum Output: +6.9dBu (@ 1% THD into 1kΩ)
Dynamic Range: 121dB (per IEC651)
Maximum SPL: 139dB (@ 1kHz, 1% THD into 1kΩ load)
Signal/Noise: 76dB SPL (A - weighted per IEC651)
Power Req.: 48V Phantom Power
Dimensions: Length - 217mm; Diameter - Ø22mm
Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
Net Weight: 105g
Thank you for your interest in the Rode NTG-1 Directional Super Cardioid Condenser Microphone.
You can either call our offices on -
NYC 888.223.1599 • CHI 877.880.4267 • LA 888.700.4416
Or you can email us using this form and someone from our sales department will contact you shortly.
Fields in red are required, however, the more details you provide the better we can assist you.
