With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. It is fully compatible with Arri and OConnor camera plates, and features a fine adjustment for a tight, secure fit even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtler's patented leak-proof frictionless cartridges, which carry a separate 5-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and caliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever.
The 6386 EFP 2 CF one-stage tripod features a die-cast 150mm receiver, dual 22.0mm carbon fiber composite leg tubes, and rapid-action clamps for fast, secure setups. Stronger than steel and lighter than aluminum, carbon fiber composites have the added advantage of absorbing vibration- a particularly useful trait with HD cameras. Used in conjunction with the included 7007 mid-level spreader and the 7004 rubber feet, payload integrity is assured regardless of terrain.
Features:
Side-Loading Rapid Camera Mount
Snap&Go side-loading mechanism gets heavy camera packages mounted quickly without compromising safety or sliding range, and is also compatible with Arri and OConnor camera plates
18-Step Counterbalance and 7-Step Drag
For rapid setup and repeatable results
Payload Range Selector
Switch between the High and Low counterbalance ranges with a flip of the front-mounted Payload Range Selector lever
Caliper Disk Pan and Tilt Locks
Similar to braking systems on trucks or trains, the default position is on - in case of a system failure, the head will be locked
Illuminated Bubble Level
The Touch Bubble is a self-illuminated spirit level activated through contact, and is powered by three PX625A cells
Assistant's Box Mount (optional)
Using the optional Front Box Adapter, an assistant's box may attached to the front of the head without impairing the tilt range
Eyepiece Extension Support Adapter (optional)
Provides an anchorage point for eyepiece extension rods on the left side of the head
Carbon Fiber Composite Leg Tubes
22.0mm Carbon fiber leg tubes absorb vibration, are stronger than steel, and lighter than aluminum
