When shooting in mixed lighting scenarios, the L-358 displays the combined exposure values of both flash and ambient light sources, including the percentage of flash in total exposure in 10-percent increments. Quick exposure factoring is achieved via dual ISO buttons when working with two different film speeds or other situations where comparison readings are needed.
Exposures accurate down to a tenth-of-a-stop for both ambient and electronic flash light readings (in full-stop mode). Meter can also display shutter-speeds and apertures in half or third-stop increments to mirror the exposure settings on your camera
Sekonic RT-32 Radio Transmitter Module installs easily, enabling wireless, Selective Quad Triggering of PocketWizard-enabled electronic flash units up to 100 ft away
Swivel-mounted head (270-degrees) allows for uninterrupted visual contact with LCD screen from any reading angle
Incident readings of three-dimensional subjects are taken using the Lumisphere fully extended, and retract the Lumisphere for selective, narrower-field readings for flat-field objects such as artwork. For reflected readings, a Lumigrid (included) replaces the Lumisphere.
Dust-proof and splash-proof (JIS Standard Water Resistance Class 4). Weather-sealed against dust storms, nor'easters, and the occasional rogue wave
At ISO 100, the EV measurement range is -2 to 22.9. Aperture ranges from f/1 to f/90.9 with a shutter-speed span of 60-seconds to 1/8000th-of-a-second (1-sec to 1/1000th for flash). For cinema applications frame-rates can be set from 2 to 360 frames-per-second. ISO range can be set from 3 to 8000 in third-stop increments
Up to 9 readings can be stored in memory for meter averaging and contrast evaluations in Aperture and Shutter priority modes
