With important features to accommodate nearly any over-the-shoulder production, the 302 interfaces with wireless transmitters and receivers, camera audio inputs of all kinds, and external audio recorders. Its microphone inputs share the same superb circuitry of all Sound Devices field production tools.
KEY FEATURES:
Lundahl transformer-balanced mic or line level inputs on XLR connectors
Continuously adjustable input trim
Two-position high-pass filter
Pan switches
Limiters on inputs and outputs
Stereo and MS linking of channel 1 and 2
Phantom (48 V or 12 V) or "T" microphone powering selected per channel
Solo (PFL) channel monitoring in headphones
Peak limiters per channel
Tape level output on TA3 locking connectors
Active-balanced line/tape/mic level outputs on XLR connectors
Return input for monitoring
Channel 4/5 input option
Sunlight-viewable LED meters with proprietary software selected ballistics
On-board MS stereo matrix
Push pots for setup features to keep the front panel clutter-free
Durable extruded aluminum chassis
Weight less than 1 kg with batteries
Powered by three AA batteries or external 5 - 18 VDC
General
Inputs
3 - 3-pin LR female: microphone / line level level
Output
2 - 3-pin LR male: microphone / line level refer to manual for set up
Monitor/Headphone Out
PHONES: 1/8" (3.5mm) mini stereo output jack
ALT I/O
RN: 1/8" (3.5mm) mini stereo output jack - monitor input / alternate ch. 4&5 inputs refer to manual for set up TAPE OUT/MIX OUT: TA3-type unbalanced
Link Input/Output
Above TAPE OUT / MIX OUT is also used to link to the Mix In of a 442 or 302
THD + Noise: 0.007% typical (1kHz, +4dBu at Line Out) 0.009 max (50Hz to 20kHz, +18dBu at Line out, fader fully up)
Metering
Stereo (L/R) 20 segment, sunlight viewable LED meters
Control Voltage Out
No
Phantom Power
Operating: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing) Storage: -40 degrees to 85 degrees Celsius
Operating Temperature
130mA @ 4.5V, internal batteries, idle, no phantom
55mA @ 12V external DC, idle, no phantom
Power
1/4" and 3/8" screws attachment type
Dimensions
(H x W x D)
1.8 x 8.4 x 4.5" (47 x 214 x 114mm)
Weight
1.8 lbs (0.85kg) unpackaged with three alkaline AA batteries
Thank you for your interest in the Sound Devices 302 Portable 3 Channel Field Mixer.
You can either call our offices on -
NYC 888.223.1599 • CHI 877.880.4267 • LA 888.700.4416
Or you can email us using this form and someone from our sales department will contact you shortly.
Fields in red are required, however, the more details you provide the better we can assist you.
The Sound Devices 302 is a three-channel mixer that features a compact size and intuitive design. All the controls that are needed for operation are located on the front of the unit, making it easy to operate even when in a bag. The audio quality of the 302 mixer is excellent. It packs a lot of features into a low profile unit that is rugged and lightweight. Watch Ian McCausland's video to learn more.
