Cube’s web interface features a Setup Wizard to simplify configuration. After connecting video and powering-up Cube, create a network, log on to Cube’s web interface, complete the Setup Wizard, and begin streaming video.
Cube uses H.264 High Profile (Level 4.1) video compression, which is the most advanced compression algorithm in the world today, and it features a built-in scaler to convert from 1080 to 720, 480 or 240 resolutions. Users can choose a resolution and target bit rate based on the availability of IP bandwidth. Typical bit rates for HD are between 2-4Mbps, and SD bit rates are typically sub-1Mbps. Cube's end-to-end latency is approximately 1/8-1/2 second. Cube is tiny (about the size of a deck of cards), uses only 2.5W of DC power, and weighs only 6 ounces, and mounts easily to a rail system, cage, hotshoe, or camera baseplate. Cube’s line-of-sight WiFi range is approximately 300 feet when used with a high quality WiFi access point. Cube has been tested extensively with RED One, Arri Alexa, Panavision Genesis, Canon 5Dii, Canon 7D, various handi-cams and more.
Available Models (please specify when ordering):
Cube-200 - HDMI Encoder
Cube-220 - HDMI Encoder with Built-in WIFI
Hot Shoe Mounting Adapter
110-240V AC Adapter / Power Supply
Video Cable
Antenna (WIFI Models Only)
Teracentral Management Software
Quick Start Guide
Streaming Output Resolutions
Cube features a built-in scaler to downscale to lower resolutions.
• 1080p/PsF @ 23.98/24/25/29.97/30Hz
• 1080i @ 50/59.94/60Hz
• 720p @ 50/59.94/60Hz
• 480p @ 50/59.94/60Hz
Video Codec
• Compression Algorithm: High Profile H.264 (L4.1), MJPEG
• Bit Rate: 250 Kbps to 10 Mbps
Audio
• Embedded Stereo over HD-SDI or HDMI
• 1/8” Stereo TRS Line Level input
• Audio Compression: AAC-LC, MPEG Layer 2
Network
• Ethernet: 10/100BASE-T
• Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
•Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS*, HTTP Live Streaming
• Feature-rich WebUI for configuration and control
• Point to Point (TCP or UDP), Multiple Unicast (UDP), or
• Multicast (UDP+IGMP)
• 4G Compatible
Physical
• Dimensions: 2.5”W x 3.5”D x 1”H
• Weight: 6 oz.
• Nominal Power Consumption: 2.5W
• PoE: 802.3af Compliant
• Auxiliary Power Input: 9-24V DC
Environmental
• Temperature: 0 to +50 C
• Humidity: 95% non condensing
Interfaces
• USB 2.0: 1 Powered Port (Optional)
• WiFi: Internal 802.11n (Optional)
Specification subject to change or revision.
Thank you for your interest in the Teradek Cube One Channel HDMI Encoder.
You can either call our offices on -
NYC 888.223.1599 CHI 877.880.4267 LA 888.700.4416
Or you can email us using this form and someone from our sales department will contact you shortly.
Fields in red are required, however, the more details you provide the better we can assist you.