Wooden Camera D-Box (Gold Mount) for ARRI ALEXA Mini Camera

This Wooden Camera D-Box (Gold Mount) is a custom version of Wooden Camera's popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini.

The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to a Wooden Camera Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system please use the Battery Slide paired with the same Rod Clamps listed above.

This product will attach to the ARRI BAP-1. Instructions on how to do this are included in the box.

Authentic Anton Bauer plate provides 1x D-Tap (unregulated) and is hard wired to the D-Box.

D-Box Slots Include:

1.   7 pin LEMO - EXT Port
Replica of connector on rear of camera
Maintains functionality of external communication, R/S, and power
Note this slot is not swappable

2.   2 pin LEMO - 12V Unregulated
ARRI standard wiring
This slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)

3.   2 pin LEMO - 12V Unregulated
ARRI standard wiring
This slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)

4.   3 pin Fischer - 24V Regulated
Regulator built in to convert battery voltage to 24V
Maximum 3A shared between slot 4/5
Note this slot is not swappable

5.   3 pin Fischer - 24V Regulated
Regulator built in to convert battery voltage to 24V
Maximum 3A shared between slot 4/5
Note this slot is not swappable

6.   4 pin Mini XLR - 12V Input
Hot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)
Capable of providing power to accessories and camera with out brick battery attached
Note this slot is not swappable

Specifications:
Weight: 534 grams (1.18 lbs)
Dimensions: 90 x 146 x 43mm (3.5 x 5.7 x 1.7 inche