Zacuto Z-Finder 3" Adhesive Frame

The Zacuto Z-Finder 3" Adhesive Frame is for use with all Zacuto Z-Finder Viewfinders. This is an alternate solution to Zacuto metal mounting systems if you are looking for something small and lightweight that does not need to be attached beneath your camera. It also enables use of your Z-Finder on multiple cameras.

This frame is compatible with most 3” LCD screens regardless of camera size. These cameras include, but are not limited to, the Canon 5D Mk II, 7D, T2i, 1D Mk IV, Nikon D3S, D300, D700, and the Sony A77 and A99.

Installation:

To use, take the mounting frame and peel off the adhesive protection. Slowly bring the frame down to the LCD screen being careful to align the edges of the frame to the edges of the light LCD image. Make sure that the frame is aligned and square. Apply pressure with some weight such as a book for 24 hours to fully cure. After 24 hours the Z-Finder can snap on and off the frame.

Important Note: This frame is not compatible with the D800, D4, 1DX, 5D Mk III, Panasonic GH1/2, GF1, or G5.

This frame is compatible with the Panasonic GH3, though Zacuto recommends that their GH3 Z-Finder Frame Kit be used with this camera.