icon account icon cash icon cart icon cart icon search main arrow arrow check icon camera icon light icon audio icon computer icon storage icon discount icon facebook icon twitter icon linkedin icon vimeo icon youtube icon instagram icon google plus icon share icon email icon print icon time icon phone icon email-m icon marker-m icon pdf icon remove icon comment icon out icon-status icon-star icon-switch pie-chart line-chart icon-user icon-user-1 icon-warning expand-arrow-1 expand-arrow-2 icon-upload icon-download icon-none icon-date-scheduled icon-date-available icon-is-hazardous
Header image for article IBC '13: Vision Research Introduces Production Version of Flex4K

IBC '13: Vision Research Introduces Production Version of Flex4K

The production version of the new Phantom Flex4K camera was officially introduced today at the International Broadcasting Convention (IBC) in Amsterdam.

Frame rates are, of course, a part of the new Flex4K's DNA; the camera is capable of up to 1000fps at 4K resolution and up to 2000fps at 2K. But there are many features in addition to frame rate that really put the "flex" in Flex4K. The camera's innovations are apparent from a quick glance at its industrial design and a review of key specifications.

Resolution & Frame Rates Chart

Format Resolution FPS to RAM
Full Sensor 4096x2304 940fps
DCI 4K (1.89) 4096x2160 1000fps
Quad HD 3840x2160 1000fps
DCI 4K (2.35 crop) 4096x1744 1240fps
HD 1920x1080 2000fps


Camera Design

An all-new industrial design reflects some significant improvements for the Phantom line. The large, convenient handle on top is now there because the CineMag port has been moved from the top of the camera to the operator side. A flip-out door and rail slot ensure a more positive, safe, and reliable connection. The new CineMag IV is both smaller and larger than the CineMag II - smaller in physical size and larger in capacity (up to 2TB), which reflects overall trends in flash storage. The CineMag is, however, still far from "off the shelf" storage because of the incredibly fast data rates required.

Another physical change is the relocation of all connections from the back of the camera to the rear section of the right side. This makes way for a battery port on the back to hold industry-standard batteries for handheld and portable operation.

Sensitivity and dynamic range are important benchmarks in digital cinema. Early testers have said the Flex4K has the least amount of noise of any digital cinema camera in existence. The lack of noise in the blacks means the camera can be rated for a range of shooting conditions and corresponding exposure values, from 250 ISO to 2000 ISO. This ability contributes to the camera being considered both a high-speed camera, as Phantom is known for, as well as a standard frame rate camera.

RAW and Uncompressed

There have always been two ways to record Phantom, as either a RAW 'Cine' file on a CineMag or as video through the HD-SDI outputs onto an external recorder. Now there is another recording path: an industry-standard codec recorded onto the CineMag. In this configuration, the compression happens in-camera and has the advantages of longer record time and smaller files for a simplified workflow. For maximum flexibility in post processing, the RAW recording option is still a choice.


Phantom operational control has been significantly improved in the Flex4K. On the operator side, there are buttons for capture, trigger, playback and save. On the right side, a user interface screen provides full-featured on-camera controls for the first time in a Phantom camera. Basic and advanced parameters are both available from the user interface. It's easy to set up general conditions for the shoot like resolution and playback speed, as well as have quick access to other parameters like frame rate and shutter angle. The interface is very intuitive and conforms to the way digital cinema cameras are currently expected to operate.

Remote control takes on another dimension with the PCU2 from AbelCine, which for the first time will have a wireless option. 


The Flex4K demonstrates further flexibility with a choice of viewfinders. Existing component signal viewfinders, in particular the Sony C30W and C35W, will function on the Flex4K with the appropriate custom cable. Additionally, Vision Research will offer a new Phantom branded OLED viewfinder with full HD resolution and a custom data overlay specific to the Phantom menus and display modes.


Four HD-SDI video outputs offer a choice of either 1080p 4:4:4 or 4K 4:2:2 output. Each of the four 1080p outputs can be configured for either a clean signal or a signal with frame lines and information display. These outputs can show either Rec709 or a pre-set Log signal.

By combining two of the 3G outputs, a 4K Ultra HD signal can be seen on a 4K monitor.

Imager Size and Flexibility of Optics

The Flex4K sensor is slightly larger (31.7mm diagonal) than a Super35, 3-perf film frame (28.5mm diagonal). Since 35mm format lenses are meant to cover the full film frame (31.1mm), virtually all PL and Panavision mount lenses will cover. The camera can also be fit with Nikon F/G or Canon EF mounts.

The slightly larger sensor and 4K resolution mean that anamorphic lenses will work and produce a very high-quality image with a minimum (16%) of focal length difference.

In 1920x1080 mode, the image sensor is the equivalent to the Super16 image circle of 14.5mm which means that Super16 lenses can be used without an adapter to achieve 2000fps.


The new smaller, less expensive CineStation IV makes the downloading and conversion of RAW files faster and easier. (Pictured below is a CineMag IV mounted in the CineStation IV.) Both PC and Mac download solutions are supported. Vision Research has also worked with Glue Tools to include, with every camera, one license of the Cine Toolkit and Séance software for the downloading of raw Cine files directly in Mac OSX.

All of these capabilities add up to the most advanced and flexible digital cinema camera we have yet seen. We recently took the Flex4K prototype on a few "test drives" with a number of cinematographers and the feedback has been extremely positive. It's interesting how, based on their typical style of shooting, the different cinematographers each found different aspects of the camera system that excited them. Stay tuned in the coming weeks for more information about these projects and the impressions of Flex4K directly from the filmmakers.

Moe Shore
Guest Contributor

Related Products

Related Trainings & Events


Intro image for article Phantom Flex4K Field Tests & First Impressions
Tech News
At this year's IBC show in Amsterdam, Vision Research officially unveiled the production model of the Phantom Flex4K. A couple of our clients and friends have recently gotten their hands on a prototype of the camera, so check out the footage and behind the scenes photos below.
Intro image for article Phantom Flex4K FAQs
Tools, Charts & Downloads
The Phantom Flex4K from Vision Research is a significant evolution of the Phantom high-speed camera line. In this article, we've answered some of the most commonly asked questions regarding Phantom and the groundbreaking, new Flex4K camera.
Intro image for article NAB 2017: Phantom Flex4K-GS
Tech News
In this video, Toni Lucatorto of Vision Research tells me all about the latest update to the Flex4K, a Global Shutter option. This important update is the first to the Flex4K system since it was released around three years ago.