Overview
The Sennheiser ME 64 Shotgun Microphone with K6P Phantom Powering Module & Hard Case combo set includes the following items:
Sennheiser ME 64 Shotgun Microphone
The ME 64 is a cardioid microphone head designed for use with the K6 (not included) and K6P (included) powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Features a matte black, anodised, scratch-resistant finish.
Features:
- Excellent directivity across whole frequency range
- Very good feedback rejection
- Effective rejection of incidental rear noise
- High speech clarity
- High maximum sound pressure level
- Wide frequency range
- Integrated pop filter
Specifications:
- Pickup Pattern: Cardioid
- Frequency Response: 40Hz - 20kHz (+/- 2.5 dB)
- Sensitivity: 31 mV/Pa (+/- 2.5 dB)
- Nominal Impedance: 200 Ohms (with K6)
- Min. Terminating Impedance: 1000 Ohms (with K6)
- Equivalent Noise Level: 16 dB CCIR-weighted (CCIR 468-3) 25 dB
- Max. SPL: 130 dB (THD= 1 %)
- Dimensions (Diameter x Length): 22.5mm x 106mm
- Weight: 0.08 lb (35 g)
Sennheiser K6P Microphone Powering Module
The K6P powering module is similar to the K6 powering module, but is powered by 12-48V Phantom Power only, for use where battery power is not required (e.g., permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Features a matte black, anodised, scratch-resistant finish.
Features:
- Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
- On/Off switch
- High output, low noise
- Transformerless, balanced output on 3-pin XLR connector
Sennheiser MZQ 2000 Clip
Standard microphone holder for MKH-8000 series microphones, with angle adjustment.
Sennheiser K6C-SM Hard Case
This microphone hard case features precision-cut foam for housing a shotgun microphone and K6/K6P powering module, with accessories.
Compatibility:
- Sennheiser ME62/K6/K6P Combo
- Sennheiser ME64/K6/K6P Combo
- Sennheiser ME65/K6/K6P Combo
- Sennheiser ME66/K6/K6P Combo
What's in the Box
- Sennheiser K6C-SM Hard Case
- Sennheiser MZQ 2000 Clip
- Sennheiser K6P Microphone Powering Module
- Sennheiser ME 64 Shotgun Microphone
Specifications
Key Highlights
- Sennheiser ME 64 Shotgun Mic
- K6P Phantom Powering Module
- MZQ 2000 Microphone Holder
- Hard Case
- +48V Phantom Power ONLY