Overview
Teradek Bolt 500 3G-SDI/HDMI Wireless Transceiver Deluxe Set + 10" BNC Coiled Cable Kit includes:
- 1x Teradek Bolt 500 3G-SDI / HDMI Wireless Transceiver Deluxe Set
- 1x CineCoil Coiled HD-SDI BNC Cable - 10"
Teradek Bolt 500 3G-SDI / HDMI Wireless Transceiver Deluxe Set
The Teradek Bolt 500 3G-SDI / HDMI Wireless Transceiver Deluxe Set offers highly refined software, new wireless radios, and a redesigned chassis, and is an extremely reliable and capable monitoring solution. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capability (1 Transmitter can multicast to up to 4 Receivers), manual frequency selection, and the USB 3.0 GRAB Engine are all included on the Bolt 500, with the following new features:
- Longer Range: transmit visually lossless video up to 500 feet with no delay
- Rapid Reconnection: reconnect times during a dropped link are now instantaneous once you move back into range
- (2) New DFS Channels: operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
- Integrated HDMI to SDI Converter: Ideal for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
- More Robust Than Ever Before: reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link Teradek has created to date
This kit also includes the Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 to 1/4"-20) with Arm Ball (3/8"-16), Bolt Transmitter Mounting Bracket, Bolt Receiver Mounting Bracket, and Protective SKB Case.
The Ultra Arm Mini Monitor Mount is an articulating arm with tool-free 1/4"-20 knobs, non-slip rubber pads on each end, and a center double ball clamp. This is a shorter version of the Ultra Arm and is ideal for keeping your LCD or accessory close to the camera body while still acheiving a good range of motion.
The Ultra Arm Ball (3/8"-16) features a tool-free 3/8"-16 screw knob, non-slip rubber pad, and a 25mm (1") ball. Also included are two locating pins that can be installed, converting it to an ARRI accessory mount compatible device!
NOTE: This component is also compatible with existing 3rd party 25mm ball mounts.
CineCoil Coiled HD-SDI BNC Cable - 10"
This 10" CineCoil Coiled HD-SDI BNC Cable comfortably extends to allow mobility and adjusting of onboard monitors, wireless systems, and recorders. This 10" cable extends an additional 8", and is ideal for on board monitors, wireless systems, and Steadicam™ configurations.
Features:
- 10" to 18" cable length
- 75 Ω
- 30 AWG
- Gold Pin Connection
- SD/HD/3G Compatible
NOTE: Please stretch responsibly to avoid reducing cable life.
What's in the Box
- CineCoil Coiled HD-SDI BNC Cable - 10"
- AC Adapter (LEMO 2-pin) w/ 6' Cable
- USB 3.0 Cable A to Micro B - 3'
- Lightstand Adapter (1/4"-20)
- Thumb Screw (1/4"-20 x 1.25")
- 3 x SDI (BNC to BNC) Cable - 10"
- 2 x HDMI Type A to Type A Cable - 18"
- Hot Shoe Adapter (1/4"-20)
- 2 x P-Tap to LEMO 2-pin Power Cable - 18"
- 2 x SDI BNC to BNC Cable - 10"
- Bolt TX Mounting Bracket
- Bolt 500 3G-SDI / HDMI Wireless Receiver
- Bolt 500 3G-SDI / HDMI Wireless Transmitter
- Bolt RX Mounting Bracket
- Wooden Camera Ultra Arm Mini Monitor Mount (1/4-20 to 1/4-20) with Arm Ball (3/8-16)
- Protective SKB Case
Specifications
Key Highlights
- Transceiver with Mount + Coiled Cable
- Transmit with no delay up to 500 feet
- Short, articulating arm mount included
- Visually lossless transmission
- HDMI > SDI converter on Tx
Cable
Shipping
Bags & Cases / Covers
Power
Software / Apps / Plugins
Supports
Wireless
Included Products
- CineCoil Coiled HD-SDI BNC Cable - 10" X 1
- Teradek Bolt 500 3G-SDI / HDMI Wireless Transceiver Deluxe Set X 1