Overview
This set includes the following items:
- Wireless Video Transmitter WVT-1 (K2.0014051)
- Wireless Video Receiver WVR-1 (K2.0014053)
- 3/8" Thread Adapter (K2.0014893)
- USB Cable WVS (K2.0014216)
- LEMO 2-Pin Male to Fischer 3-Pin Female Cable - 1.6'/0.5m (K2.0014331)
- Fischer 3-Pin Male to Female Cable - 1.6'/0.5m (K2.0001637)
- Cable D-Tap - Fi f3p (0.5m/1.6ft) (K2.0002668)
- L-Bracket (K2.0001967)
- HDTV BNC Cable (0.3m/1ft) (K2.0014991)
- Multi Interface Adapter MIA-1 (K2.0014323)
- Receiver Power Supply RPS-1 (K2.0014774)
- (7) Video/WiFi/ECS Antennas (K2.0014568)
- Wireless Video System Case (K2.0015006)
NOTE: Battery Adapter Plates for WVR-1 are not included and must be ordered separately.
The ARRI WVR-1 Wireless Video Receiver is a standalone wireless receiver that accepts a realtime, uncompressed video signal from the integrated transmitter of the ALEXA SXT W or the standalone WVT-1 Wireless Video Transmitter (included). Features up to 1,970' (600m) range with less than 1ms latency, 128-bit AES encryption, and 10-bit video output with HDR monitoring support. Also features dual-channel embedded audio, timecode, and HD-SDI record flag function support. Up to four Receivers can be paired with one Transmitter.
The system automatically and continually scans the airwaves and selects frequency channels with low interference levels. This is called DFS (Dynamic Frequency Selection). In DFS, all channels are continuously monitored and ranked for immediate use by the WVS. In case of interference on any channel, the system immediately hops to a better channel without losing even a single pixel of video. Due to legal restrictions, manual frequency selection is not available.
The housing is spray (water) resistant and dustproof aluminum with integrated collars for antenna and BNC connectors, and offers several mounting options. The WVR-1 also has a wide operating temperature range, from -4°F to 113°F (-20°C to 45°C).
WVR-1 accept a wide input voltage range from 10.5V to 34V. Additionally, the receiver can be powered from an AC power supply, Gold Mount, V-Mount, or SONY L series battery (sold separately). The receiver has a 12V power output for accessories like a director's monitor, reducing the size and weight of handheld monitor configurations.
NOTE: Depending on your configuration and the power consumption of additional accessories, a single L series battery might not be sufficient to supply power through the PWR OUT connector of the WVR-1. In that case, add a second L series battery or use the Receiver Power Supply RPS-1 (included).
Software Update:
ARRI has released WVS Software Update Package (SUP) 4.3.26, shipping with all ARRI Wireless Video System components: integrated HD video transmitters inside ALEXA LF and ALEXA SXT W cameras, Wireless Video Transmitter WVT-1 and Wireless Video Receiver WVR-1.
This SUP adds the following new features and changes:
- WVS SUP 4.3.26 improves the reliability and signal robustness of the integrated wireless video transmitters within ALEXA LF and ALEXA SXT W cameras
- Due to a faulty calibration, these transmitters were not able to supply full transmission power to the antennas with software before WVS SUP 4.3.26
- The stand-alone Wireless Video Transmitter WVT-1 and the Wireless Video Receiver WVR-1 are not affected by this
- SDI OUT 1/2 of the Wireless Video Receiver WVR-1 now include the correct VPID (Video Payload Identifier)
- This allows using the output of WVR-1 with a variety of monitors and converters with automatic signal detection
- To benefit from this bug fix, the WVR-1 needs WVS SUP 4.3.26 installed
What's in the Box
- Wireless Video System Case (K2.0015006)
- 7 x Video/WiFi/ECS Antennas (K2.0014568)
- Receiver Power Supply RPS-1 (K2.0014774)
- Multi Interface Adapter MIA-1 (K2.0014323)
- HDTV BNC Cable (0.3m/1ft) (K2.0014991)
- L-Bracket (K2.0001967)
- Cable D-Tap - Fi f3p (0.5m/1.6ft) (K2.0002668)
- Fischer 3-Pin Male to Female Cable - 1.6'/0.5m (K2.0001637)
- LEMO 2-Pin Male to Fischer 3-Pin Female Cable - 1.6'/0.5m (K2.0014331)
- USB Cable WVS (K2.0014216)
- 3/8" Thread Adapter (K2.0014893)
- Wireless Video Receiver WVR-1 (K2.0014053)
- Wireless Video Transmitter WVT-1 (K2.0014051)
Specifications
Key Highlights
- Wireless Video TX & RX Set
- Includes mounting & power accessories
- Includes system case
- Optional battery plates not included