Overview
Teradek Bolt 500 LT 3G-SDI Wireless TX/RX offers cross compatibility with a 500 ft range (1000 ft sold separately) and external antennas on the transmitter for enhanced wireless performance with zero latency. The Bolt 500 with a transmitter and a receiver is an affordable, streamlined series of zero-delay wireless video systems. Bolt 500 LT is the essential, no-frills high performance wireless video system for filmmakers on a budget.
Not only is the Bolt LT lighter, but it is smaller, too. The Bolt LT offers no-frills high performance with a single 3G-SDI or HDMI input with matching looping output. Secure your Bolt 500 LT to your camera or other HDMI source with provided mounting points. The receiver includes a single 3G-SDI or HDMI output. Multiple mount points on the TX and RX are available in 3/8" and 1/4"-20 sizing. This will help you seamlessly mount your Bolt LT to your camera rig. You can also power your wireless system with your integrated bi-directional Sony L-Series or Canon LP-E6 pass-through battery plates.
Features:
- SDI loop out on TX
- Compatible with your 3rd generation Bolt 500, Bolt 500 XT, Sidekick II, and 703 Bolt
- External antennas on Bolt 500 TX
- Smaller and lighter chassis design with robust mounting points (3/8" and 1/4"-20)
- Same wireless performance as your Bolt XT
The LT line is cross compatible with your Bolt XT, 3rd generation Bolt systems, and SmallHD Bolt models. This backward compatible technology is paired with the ability to be compatible with your Bolt XT, as well. That way you can build upon your existing Bolt wireless systems or plug into others already operating on set or location.
Bolt 500 LT will pair with up to (3) additional receivers. This set comes with 1x Transmitter and 1x Receiver. Examine What's in the Box for more detail.
Optional Sony L-series or Canon LP-E6 pass-through battery plates are available for both the TX and RX.
What's in the Box
- SDI BNC to BNC Cable - 10"
- PSU 2-Pin Connector to 18W AC Adapter Cable - 6 ft
- USB 2.0 Cable (a-male to mini-B)
- Lightstand Adapter (1/4"-20)
- Bolt 500 LT Receiver
- SDI BNC to BNC Cable - 10"
- USB 2.0 Cable (a-male to mini-b)
- 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
- Hot Shoe Adapter (1/4"-20)
- 2-Pin Connector to PowerTap Cable - 18"
- Bolt 500 LT Transmitter
Specifications
Key Highlights
- Transmit up to 500'
- 3G-SDI In/Out
- Supports up to 1080p60
- Zero delay
- 2x external antennas
- 2.4 & 5.8 GHz noise rejection
- AES128 Encryption