Overview
Overview
The Teradek Bolt 1000 3G-SDI/HDMI Receiver is compatible with the Bolt 1000 Transmitter (sold separately). This Receiver can output either 3G-SDI or HDMI video. With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek has built to date. Features metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine.
Features:
- Longer Range: transmit visually lossless video up to 1000' with virtually no delay
- 20MHz Channels: use more than twice as many Bolts in one location or avoid interference like never before
- Option to transmit in 20 or in 40 MHz channels; 40MHz supports audio, interlacd, PsF, and 1080p 60/50
- (2) New DFS Channels: operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
- 20% smaller chassis: not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
- Individual Identity: easily identify which Bolt TX and RX work together with removable colored top plates
- Rapid Reconnection: reconnect times during a dropped link are now instantaneous once you move back into range
- Built-In HDMI to SDI Converter: ideal for use with MoVI and other gimbals, Bolt's TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
- More Robust Than Ever Before: reach your Bolt's full range and potential right out of the box with new software that provides the most robust wireless link from Teradek
- Select Dynamic or Manual frequency choice
NOTE: Transmitter and other accessories sold separately.
What's in the Box
- 5 x Wireless Antenna (2sBi 2.4/5.8 GHz) for Receiver
- USB 3.0 (Type A to Micro B) Cable - 3'
- PSU 2-Pin Connector to 18W AC Adapter Cable - 6'
- Thumb Screw 1/4-20, 1.25"
- Lightstand Adapter (1/4-20)
- HDMI (Type A to Type A) Cable - 10"
- SDI (BNC to BNC) Cable - 10"
- Teradek Bolt 1000 3G-SDI/HDMI Receiver
Specifications
Specifications
Key Highlights
- Metadata + timecode pass through
- Output SD/HD/3G-SDI or HDMI
- Capture up to 1080p60
- Multicast capable up to (4) receivers
- Up to 1,000' range
Power
Power Input:
DC - 2-Pin connector 7-28V DC
Wireless
Receiver Options:
OLED Display - with menu joystick navigation and LED indicator lights
RF Notes:
Includes noise rejection - Unit can coexist with WiFi and 5GHz cordless phones
Supports transmitting metadata, timecode, and start/stop flags - from certain camera manufacturers. Please see Overview for link to review cameras on the manufacturer's tested list.
Video Compression:
Visually Lossless
Wireless Range:
Up to 1,000 feet - (line of sight)
RX Output:
1 x HDMI (Type A)
1 x 3G-SDI - SD/HD (75 Ohm BNC)
USB 3.0 - micro B. Permits upgrades.
Wireless Video Formats:
1080i - 50/59.94/60
480i - (NTSC)
720p - 50/59.94/60
1080p60 - 23.98/24/25/29.97/30/50/59.94/60
480p - 59.94/576p50 (via HDMI port only)
576i - (PAL)
1080p - sf23.98/24/25/29.97/30
Audio Compression:
48kHz 24-bit PCM
