Wooden Camera Canon C300mkII Unified Accessory Kit (Pro)

Wooden Camera Canon C300MKII Unified Accessory Kit (Pro) is a camera support package designed for your Canon 300 MKII camera. The C300mkII accessory package includes: Top Plate (C300mkII), a top-mounting camera cheese plate for secure camera accessory attachment, Unified Baseplate (C300mkII), a quick release baseplate that holds two 15mm Rod (12") at the correct lens height, Safety Dovetail (12") which interfaces with the ARRI dovetail slot on the bottom of the Unified Baseplate, UVF Mount V2 for holding EVFs & LCDs, Rod Clamp (15mm LW) attaches the Battery Slide to the 15mm LW rods. The Battery Slide is an adjustable battery plate for attaching a V-Mount or Gold Mount plate to your camera.

Also, as part of the included Top Plate (C300mkII), your will have another way to mount accessories with the Universal Hot Shoe, which is used to attach your Canon LCD Unit to any 1/4-20 or 3/8-16 hole.

Top Plate

Top Plate for the Canon C300mkII camera is ideal for mounting your on-board monitors, EVF mount, or camera cage handle. The Top Plate features arrays of 1/4-20 holes in standard 9mm spacing. Multiple 3/8-16 holes are also included for larger accessories. ARRI standard accessory mount can be found on top and sides. Includes Universal Hot Shoe for attaching your Canon C300mkII LCD Unit.

• Weight: 0.3 lb (117 g)
• Dimensions: 2.8 x 2.5 x 0.9" (71.4 x 64.1 x 23.3 mm)

Includes:
(3) 1/4-20 x 3/8" socket cap screws
(1) 1/4-20 low profile screw (Universal Hot Shoe)
(1) 3/8-16 low profile screw (Universal Hot Shoe)

NATO Handle Kit (Cheese, 70mm)

The Wooden Camera NATO Handle Kit (Cheese, 70mm) is designed for quick release attaching and detaching on the camera, without screws. Simply slide the handle onto its Safety NATO Rail (included) and tighten down the thumbscrew. The 70mm NATO Rail can attach to any two screw points up to 42mm apart, center to center. The cheese grip features a 19mm rear port for a spud (sold separately). Arrays of 1/4"-20 and 3/8"-16 female threads provide mounting points for additional accessories.

• Weight: 0.5 lb (222 g)
• Dimensions: 4.8" x 2.9" x 1.3" (121.3 x 72.7 x 33.3mm)
• Material: Aluminum

Unified Baseplate 

The Wooden Camera Unified Baseplate is a quick-release baseplate to provide lightweight 15mm rod support at the correct lens height for these Compatible Cameras:

• Canon C100
• Canon C100 MKII
• Canon C300 
• Canon C300 MKII
• Canon C500
• Canon C700
• Sony PXW-FS7

15mm rods pass through front-to-back and feature (2) locking thumbscrews per side.

• Weight: 0.8 lb (362.8 g)
• Dimensions: 2 x 6 x 6" (50.8 x 152.4 x 152.4 mm)

Unified Baseplate includes:

• Baseplate core module (no dovetail)
• Dovetail Plate
• Lower Quick Dovetail
• (2) 1/4-20 low profile screw
• (2) 3/8-16 low profile screw

The baseplate quick-releases in two ways which provides you, the camera operator, the option to pack and take your 15mm lightweight rods or to leave them behind.

Features:

• Upper dovetail based on ARCA Swiss dovetail shape
• Vertical 15mm rod hole for optional support posts
• Pass Through 15mm lightweight rod openings (with 2x locking thumbscrews per rod)
• Lower dovetail based on an ARRI standard dovetail shape
• 1/4-20 and 3/8-16 mount holes for securing to tripod plates or bridgeplates

On the upper dovetail, a vertical 15mm rod opening is included to support a lens adapter foot directly in front of the camera body. (An example of this would be the Sony FS7 using a Metabones Canon EF adapter.) The upper dovetail would be positioned with the vertical 15mm rod opening to the front and the optional Wooden Camera Unified Lens Adapter Support Kit would be installed and threaded into the Metabones support foot. 

The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4"-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. The bottom of the baseplate is comprised of the Lower Quick Dovetail which featues 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio).

To remove the camera and leave the LW 15mm rods behind:

Unlock the right side thumbscrew, slide the camera backwards a short distance, then lift straight up.

To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you:

Unlock the left thumbscrew, slide the baseplate backwards a short distance, then lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails, Safety Dovetails, or Shoulder Rigs.

For a VCT-14 compatible mounting option:

The Unified Baseplate can be attached to an optional Unified VCT Wedge Plate to provide easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head.

For mounting on a gimbal/jib/crane:

Additional Unified Lower Quick Dovetails can be puchased to mount to gimbals, jibs, cranes, etc. so you can perform quick and repeatable camera transitions.

NOTE: The Unified Baseplate is backwards compatible with the Wooden Camera original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large). Camera accessories are sold separately from the Unified Baseplate. 

15mm Rod - 12" (set of 2)

This pair of (2) 12" 15mm Rods fit inside the included Unified Baseplate. These 15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.

UVF Mount V2

UVF Mount v2 accepts most EVFs and LCDs. Three points of adjustment: 15mm tube clamp for tilt and distance to the camera, NATO thumbscrew (identified by red component) for positioning on NATO rail, and tension thumbscrew to adjust tilt of EVF. Tool-less design allows quick installation and removal of UVF v2 Sled. Safety pin prevents accidental removal. UVF v2 Sled can attach directly to any NATO-style rail and includes adapter for using your SmallHD and Alphatron viewfinders.

NATO Arm length approximately 5".

The included 15mm Tube Clamp bolts directly to two 1/4-20 screw holes spaced between 25mm and 36mm center to center. Can attach directly to RED Dragon/Epic/Scarlet and AJA CION. Can also attach to other cameras via Wooden Camera cages and cheeseplates.

• Weight: 0.7 lb (320 g)
• Dimensions: 8.1 x 6.3 x 2.4" (206.8 x 158.8 x 60.9 mm)

Includes:
(4) 1/4-20 x 3/8" screws
(1) 1/4-20 x 1/4" screws

Safety Dovetail (12")

This Wooden Camera Safety Dovetail is an 12" ARRI-style dovetail with a safety catch on one end to prevent accidental camera removal. The manufacturer points out that there is a release mechanism on one end and a stopper screw on the other.

Threaded 1/4-20 and 3/8-16 pass through holes are provided for accessory mounting. Tripod attachment is also included. It can be attached to a shoulder pad for custom, handheld configurations.

• Weight: 0.9 lb (427 g)
• Dimensions: 12.0 x 2.7 x 0.5" (304.8 x 68.4 x 13.4 mm)

Rod Clamp (15mm LW)

Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight.

• Weight: 0.1 lb (68 g)
• Dimensions: 4.3 x 1.0 x 0.6" (108.8 x 24.6 x 15 mm)

Includes:
(2) 1/4-20 x 1/4" screws
(2) 1/4-20 x 3/4" screws

Battery Slide

Battery Slide is an adjustable mounting system for WC V-Mount, WC Gold Mount, QRC Gold Mount, and RED/Blueshape style battery plates. Rows of pass through holes allow attachment of Rod Clamps, cheeseplates, and more. Apply firm pressure to tilt the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode.

• Weight: 0.5 lb (226.80 g)
• Dimensions: 6.0 x 4.5 x 1.8" (152.4 x 114.3 x 45.7 mm)

Includes:
(2) 1/4-20 x 1/4 Socket Cap Screws
(6) M3 x 14mm Pan Head Screws
(4) M3 x 12mm Pan Head Screws
(4) M3 x 8mm Pan Head Screws
(4) M3 x 8mm Phillips Flat Head Screws