Overview
Use the DJI Osmo Intelligent Battery Charger with the DJI Osmo Intelligent Battery. This 1-bay charger plugs into a wall socket using a provided power cable which functions in the United States and Canada.
Input: 100-240V, 50/60Hz
Output: 12.6V, 1.2A
Compatible with the Osmo, Osmo+, Osmo Mobile, Osmo Pro, and Osmo Raw.
Batteries not included.
DJI provided battery usage instructions for their customers which you may find helpful:
- Please remove the battery from the device while it is not being used and keep it in a temperate environment to prevent the battery from over heating or freezing.
- Do not charge the battery right after use; wait until it cools down. The charging environment should be between 41°F to 104°F. Take care of the battery to avoid accidents.
- Be aware of the battery during transport. A vehicle accelerating or decelerating and may cause the battery may collide with sharp objects and combust or cause other damage. Please keep batteries in a safe place while transporting in a car to prevent fires.
- Check the status of battery before using. Lack of usage or over usage may deplete battery power or lead to deviations in voltage level between the battery cells because of incomplete charging and discharging operations. Normally, these problems will arise if the battery is within a 0.2V voltage deviation.
- Please recycle a damaged battery, since lithium batteries are greatly harmful to the environment.
- Suitable storage power range is from 50% to 65% if the battery is unused for a long time.
- While using the battery under low temperature environment, between 32°F to 39.2°F, the internal resistance of the battery increases which leads to heavy drop in voltage. Therefore, please fully charge the battery before using. The voltage of battery cells reaches 4.35V. While the temperature is lower than 41°F, the battery needs to be fully charged, the voltage of battery cells should be higher than 4.2V, and warm-up and heat preservation actions should be taken before launching. The warm-up, when using an aerial device, can be achieved with the battery heater or by hovering the drone at a low altitude for around one minute.
NOTE: Please check the latest airline regulations regarding batteries before you travel to ensure the best way to ship your batteries to your location.
What's in the Box
- Limited 1-Year Warranty
- AC Power Cord (plug fits in North American outlets)
- DJI Osmo Intelligent Battery Charger
Specifications
Key Highlights
- 12.6V, 1.2A output
- Power cable for North America provided
- Compatable with DJI Osmo