Overview
The TrekPak RolliPak 72 is a 6" deep roll which is designed to replace your current Velcro or hook and loop interior bag dividers. It offers the freedom to configure your interior segments to the size and location required.
Using the velcro already seen into your bag, simply unroll Rolli into the perimeter of your bag, then cut to length. You will add interior segments to fit your gear using the provided dividers. Secure each segment or partition with a pin, which features a convenient red pull tab.
Includes:
- (1) 48" + (1) 24" perimeter pieces of Rolli
- (4) 23" dividers
- Cutter Tool
- (30) pins with 30 red pull tabs
Rolli suits the interiors of soft backpacks, bags, and shorter cases.*
To find your correct size Rolli:
- Measure the height of the dividers currently in your bag. Round DOWN to the closest height offered in RolliPak. Rounding down insures you can still close your bag with the system in place since TrekPak dividers do not squish.
- Measure the inside perimeter of your bag (this is the total length around the inside of the bag where you wish to stick RolliPak).
Rolli 72 is 72" long. If your bag perimeter is slightly bigger than 72", Trekpak suggests buying only 1 Rolli 72 and placing the gap in a section where you do not need to pin dividers.
* NOTE: This is 6" high so you want to be sure your bag depth is not smaller than 6" so you can securely close the bag.
What's in the Box
- Limited Warranty
- 30 x Pins with red pull tabs
- Cutter Tool
- 4 x 23" Dividers
- 24" perimeter pieces of Rolli
- 48" perimeter pieces of Rolli
Specifications
Key Highlights
- Customize your bag interior
- Secure segments with pins with pull tabs
- 6" deep divider system