PAGlink HC-PL94T 94Wh 14.8V High-Power Linking Battery - Gold Mount

The PAGlink HC-PL94T 94Wh 14.8V High-Power Linking Battery - Gold Mount is compatible with your PAGlink PowerHub, Gold Mount camera plates, and Anton/Bauer Li-Ion chargers. Two or more PAGlink batteries, in any state of charge, can be linked to combine their capacities and enable a higher current to be drawn. Up to 12A can be supplied for power-hungry camera configurations with multiple accessories.

Individual PAGlink batteries are capable of 10A alone. (2) linked batteries provide longer run-time than (2) single packs used consecutively. PAGlink also allows batteries to be hot-swapped for continuous power. Linking (2) HC-PL94T packs creates an 188Wh battery.

PAGlink batteries are UN certified and feature exceptional safety features.

Typically, up to (4) PAGlink batteries can be linked for charging on each position of Anton/Bauer Li-Ion chargers, resulting in a 16-channel unit. PAGlink batteries display their individual status during charging. PAGlink allows up to (8) batteries to be linked for charge or discharge. Linked charging was developed by PAG and is unique to the PAGlink system. The result is less battery swapping and fewer chargers required.

The PAGlink HC-PL94T battery incorporates a convenient numeric display that, with (2) button presses (under load), shows remaining camera run-time in hours and minutes. The display maintains accuracy by tracking cell-performance and adjusting calibration values to compensate for cell-aging. When batteries are linked, the run-time figure is for the entire stack, but a single button press shows individual battery capacity as a percentage.

Features: 

• Battery Mount Type: Gold Mount (3-stud)
• Compatible with optional Gold Mount/Snap-On camera plate, PAGlink PowerHub, and Anton/Bauer Lithium Ion chargers
• Smaller, lighter Li-Ion batteries with a higher energy density
• Draw up to 12A for high-current applications (10A individually)
• Combine capacities for longer run-times
• Hot-swap for continuous power
• Charge batteries linked, using optional Anton/Bauer Li-Ion chargers
• Camera run-time is displayed numerically, in hours and minutes
• Remaining capacity is displayed automatically in the viewfinder/LCD (on compatible cameras)
• Battery firmware can be updated easily in the field
• Intelligent batteries communicate and manage their own charge and discharge, safely

IMPORTANT NOTE: Always check current air travel/transport regulations for Lithium Ion batteries prior to travel.