Wooden Camera D-Box Plus for ARRI ALEXA Mini - Gold Mount

The Wooden Camera D-Box Plus for ARRI ALEXA Mini - Gold Mount is an improvement on the popular Wooden Camera D-Box for ALEXA Mini. D-Box Plus interfaces with the camera's Power, EXT, and SDI ports. The DC input is now a full size 4-pin XLR connector and is prioritized to leave the onboard battery fully charged when running on house power.

Physical fuses have been replaced by a processor-controlled amperage limit, with 3.8A, 5.8A, or 9A settings using the slide switch on the operator's side. Should the user exceed max. draw for accessories, only the accessory outputs are disabled, leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to re-engage accessory power.

High quality Anton/Bauer components are used in the Gold Mount assembly and the unibody power plate design is both extremely durable and lightweight. The bottom of the D-Box features (2) 1/4"-20 accessory threads which can attach directly to compatible Wooden Camera mounting brackets (not included). This product is also compatible with the ARRI BAP-1.

NOTE: Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are fully LEMO compatible.

Features:

• (1) Gold Mount Battery Plate
• (3) HD-SDI outputs
• (2) HDMI outputs
• (2) 3-pin Fischer outputs (at 24V) with Run Stop
• (2) 2-pin LEMO at 12V unregulated
• (2) D-Tap ports at 12V (unregulated)
• (1) 5V USB
• (1) EXT port
• (1) 4-pin XLR DC Input
• Integrated regulator converts battery voltage to 24V
• Maximum 3A surge, 2.5A sustained draw, shared between connectors
• ARRI-standard wiring
• Replica of connector on rear of camera
• Maintains functionality of external communication for Starlite monitor, R/S, and power
• Hot-swappable with onboard battery
• Capable of providing power to accessories and camera without battery attached

Cables to Camera:

• (1) 16" 8-pin LEMO compatible cable
• (1) 16" 7-pin LEMO compatible cable
• (1) 16" HD-SDI cable  

Specifications:

• Weight: 1.18 lb (534 g)
• Dimensions: 3.5" x 5.7" x 1.7" (9cm x 14.6cm x 4.3cm)