RED DSMC2 Handheld Package

The RED DSMC2 Handheld Package includes the following items:

The RED DSMC2 V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using optional RED BRICK batteries. Constructed from lightweight and durable magnesium, this expander module mounts directly to the rear of your camera BRAIN.

Connections offered:

• DC Power input (DC IN)
• HDMI 1.2 output (Type A socket)
• 3G-SDI output (HD-SDI, 75 Ω BNC)
• CTRL & SYNC ports (2x 00B LEMO 4-Pin, Timecode and Genlock support)
• AUX Power output (P-Tap 2-Pin female)
• USB Power output (Type A, 5 V at 1.5 A for powering HDMI transmitters or small mobile devices)
• Stereo Headphone output (3.5 mm jack)
• Stereo Analog input (3.5 mm jack)

The DSMC2 V-Lock I/O Expander also features a selector switch to enables your BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on/off when your RED DSMC2 camera is mounted in remote or difficult to maneuver locations.

This expander is an ideal solution for a wide variety of production environments, from low-profile run-and-gun situations, to studio shoots that require mobility.

NOTE: The DSMC2 Top Handle is NOT fully compatible with the DSMC2 Base I/O V-Lock Expander. The top handle will interfere with the battery when one is attached to the expander module.

The 7" RED DSMC2 TOUCH LCD Monitor delivers the ultimate high-definition viewing experience for recording and viewing footage on your DSMC2 camera system. The 1920 × 1136 resolution display panel provides improved color accuracy, high pixel density (at 323 ppi), 1000:1 contrast, and is bright enough for operation in high ambient light. A robust, optically-bonded touchscreen offers an intuitive way to navigate menus, adjust camera parameters, and review your .r3d clips directly out of the camera.

The lightweight display mounts directly to the BRAIN without the need for any tools or hardware. Convenient thumbscrews enable you to attach and remove the display on-the-fly. Featuring a hinge design that rotates nearly 360° and folds down to lay flat for easy transportation, as well as a 180° image rotation option—the DSMC2 RED Touch 7.0" LCD is the most ergonomic DSMC2 display available. Choose from two available variations: a robust all aluminum model, or the Woven CF model for ultra-lightweight performance.

NOTE: Using the DSMC2 LEMO Adaptor Collection in conjunction with the DSMC2 RED Touch 7.0" LCD allows the flexibility to mount the display away from the camera body.

The RED DSMC2 Side Handle offers the most ergonomic handle option by attaching directly to the side of the camera BRAIN, and is designed for shooters who prefer a compact handheld configuration.

The DSMC2 Side Handle features a molded, rubber grip and puts primary camera controls right at your fingertip. The dedicated Focus Control Wheel (front) offers direct control over lens focus, while the Iris Control Wheel (side) supports iris control and is user assignable to other camera control functions. The rotary wheel and D-Pad provide advanced control over menu options directly from the handle. 4x customizable camera parameter buttons provide quick access to controls such as exposure, white balance, magnification toggle, and autofocus.

An intelligent DSMC2 handle wouldn't be complete without a record button which allows you to toggle record on/off directly from the handle. On top of an integrated RECORD button, the DSMC2 Side Handle also includes a MARK FRAME button to empower you to tag frames while shooting and revisit them later in post-production.

NOTE: The DSMC2 Side Handle cannot be used simultaneously with the DSMC2 Outrigger Handle or DSMC2 Sidekick.

The RED REDVOLT-V 43Wh Rechargeable Lithium-ion Battery is designed to fit the profile of a DSMC2 camera body, and is ideal for the filmmaker on the go, or use in gimbal and drone configurations. This 43Wh rechargeable lithium-ion battery provides more power than the original REDVOLT yet weighs less than 1 lb (0.45 kg). This battery is compatible with any RED V-Lock battery expander or module, such as the V-Lock Battery Module or V-Lock I/O Expander.

The RED BRICK Charger is portable and lightweight, allowing you to sequentially charge (2) RED BRICK or REDVOLT-V batteries anywhere there is a standard power outlet. The RED BRICK Charger provides up to 4A in constant current mode. It can charge two attached RED BRICK batteries sequentially in approximately 6-8 hours. The RED BRICK Charger can charge one fully discharged RED BRICK in approximately 3 hours. An AC (IEC) power cable and Mini World Travel Adaptor Kit are included.

NOTE: In order to power a RED ONE camera with the RED BRICK Charger, you must also purchase a RED ONE DC Power Cable - 10' (sold separately). 

Stow your RED BRICK Batteries on this RED Battery Belt Clip for quick battery changes without struggling to remove batteries from pockets or pouches. This model clips directly into your DSMC or DSMC2 BRAIN without the use of a LEMO 2B to 1B Power Adaptor Cable. Includes a 6-pin 1B LEMO connection, D-Tap connection for auxiliary accessories (70W max).

Features:

• Allows user to mount RED BRICK on belt to power DSMC and DSMC2 cameras
• 6-pin 1B LEMO Connection
• D-tap connection for your auxiliary accessories (70W max) 

The RED STATION for RED MINI-MAG - USB 3.1 is designed exclusively for offloading data from RED MINI-MAG media to your workstation. Connect to your computer via SuperSpeed USB 10 Gbps for blazing fast transfer speeds. A sleek, compact design takes up less space than the RED STATION RED MINI-MAG – ESATA/USB 3.0 and fits easily into cases or gear bags for storage and transport.

NOTE: RED MINI-MAGs sold separately.

IMPORTANT NOTE: The RED MINI-MAG system requires that your DSMC is updated to firmware v5.1.34 or later. 

The RED DSMC Mounting Plate features a robust structure and locking elements that provide a secure attachment method for tripod or other configuration mounting. This item provides strategically placed arrows to indicate lens front when positioning the plate. 

Use the DSMC Mounting Plate in conjunction with any of RED's DSMC Quick Release mounting platforms, such as the Dovetail, for convenient locking attachment and fast removal.

The RED Quick Release Platform (Dovetail) features an ARRI-standard dovetail mount which is ideal for rapid camera deployment. It requires the addition of a camera-specific mounting plate for either the WEAPON, RED RAVEN, EPIC, SCARLET, or RED ONE. 

The Quick Release Platform pairs with your existing 15mm and 19mm rail components. It attaches to the bottom of the RED cameras listed above to produce an easy mount and removal of your equipment. RED suggests in their video that you can leave this platform on the bottom of your camera. 

The Platform includes an ARRI-style Dovetail on the bottom and the Quick Release Platform on top. The locks for each are on either side of the Platform. 

To use the 2-stage quick release:

Snap in your camera-specific platform. You will note both a lever and a small red button. Both are used to secure the Quick Release which means you cannot accidently bump it and release it while using the camera. To release the platform, depress the small, red button and push the lever. This reaches the first stage of your release. Next, press the small, red button again and pull the lever all the way over. You can now remove your camera.

To secure a dovetail accessory:

Slide in the dovetail then lock using the available mechanism on the opposide side of the Quick Release lever.

NOTE: Use this Quick Release Platform with the RED DSMC Mounting Plate (sold separately) which provides robust structure and locking elements for a secure attachment to a tripod or other configuration. You can also use up to two Universal Mounts (one on front and one on back, each sold separately) to secure your existing rail system. Screws are provided on the Universal Mount and appropriate threaded holes on the Platform for this purpose. 

The pocket-sized RED SIDEWINDER Multi-Tool provides all the drivers (flat, Phillips), Hex, and Torx keys you need for your DSMC system. The durable housing features thread guides to ensure the proper screws are used to secure hardware. 

Features:

• SAE Hex: 1/8”, 5/32”, 3/16”
• Metric Hex: M2.5, M3
• Torx: T6, T8, T10, T20
• Screwdriver: Slotted, Phillips #1
• Thread Guides

The RED WORK MAT is a great surface for building up and disassembling your DSMC configurations. This 18″ x 24″ work mat is designed exclusively by RED and provides a flexible, smooth pad for your DIT station, camera cart, or workstation.