RT Motion Complete MDR-SK Motor Kit (Z) with 6-Axis Forcezoom Controller

This RT Motion Complete MDR-SK Motor Kit (Z) with 6-Axis Forcezoom Controller is a single motor RTMotion system with LATITUDE MDR-SK Receiver and MK3.1 Controller (with Forcezoom upgrade) for RED DSMC2 cameras. It can drive up to (3) lens motors and/or electronic Focus and Iris on Canon EF and Nikon lenses.

Includes well over 1km (0.62 miles) wireless range. It is ideal for busy cities, stadiums and other harsh RF environments.

Features:

• 6-Axis Controller
• Lightweight Receiver
• 3x Power Outlets
• 1.5 km RF Range
• Supports 1-3 Lens Motors

This kit includes:

• RT Motion Lens Motor 15/19mm Rod Motor Bracket, 0.8 lens gear (RTM-3015)
• MK3.1 Controller with Forcezoom (RTM-3016Z)
• MDR-SK Receiver (RTM-4505)
• Latitude Motor Cable 20cm (RTM-8006)
• Latitude RED CTRL Cable 25cm (RTM-8751)
• Latitude D-TAP Power Cable (RTM-8820)
• Controller Wired Mode Cable - 2 meter (RTM-8312)
• RTMotion System Case (RTM-9200)
• MDR-SK Cheeseplate (RTM-6131)
• RTMotion Neck-strap (RTM-6500)
• LP-E6 Duracell Battery (RTM-6360)
• LP-E6 Travel charger (RTM-6361)
• 3x White Marking Disc (RTM-6300)

It features (3) 2-pin power outputs for your wireless transmitter, monitor, etc.

This is an official RED Third Party Accessory. It is compatible with your RED DSMC2 cameras and the RED Sidekick. Data connection will pass through and function fully.

You can fit the included cheeseplate, optional RED blanking Plate or the RED Sidekick over the MDR-SK

Worlds first brushless vector drive lens motor with faster response, smoother, quieter, high resolution encoder, no cogging, no sparking, 4x the service life of brushed motors.

The (2) slave controller inputs will support thumbwheels, Zoomrocker, Smartknob, and more. 

Compatibility

• RED
• ARRI
• Canon
• Sony
• Panasonic
• Blackmagic Design

Additional Details

Be sure to add additional motors, run/stop cables, power options and accessories your specific setup requires. Unsure what to choose? Call your AbelCine Salesperson. You will need a power source for the receiver (10-17 V DC) as none is included in this kit.

• The 3x LM 2-pin power outputs are passed through directly at the same voltage as the Power Input.
• The MDR-SK does NOT have WIFI built in as it is for use with DSMC2 cameras which have integral WIFI.
• The RED SIDEKICK is fully supported and will power and communicate normally.
• The RED DSMC2 Side Handle is currently NOT supported due to physical warranty concerns but is undergoing testing.
• RED DSMC2 Sidekick is NOT included.

NOTE: the MDR-SK has no WIFI module like the other Latitude MDR's as the DSMC2 body has integral WIFI. If you require external WIFI RT Motion recommends the MDR-X variant.

IMPORTANT NOTE: This module requires more power than the RED can supply from the Sidekick port, so you need the external power and CTRL cable included. These connect neatly at the back/bottom of the module.

MK3.1 Controller with Forcezoom

The included wireless controller features (6) customizable axes: Knob, Slider, Wheel A, Wheel B, Forcezoom X, Forcezoom Y. It includes an OLED screen with easy-to-use menu, adjustable control knob with a fluid feel, plus 42 selectable wireless channels. It offers support for wired-mode operation (for when RF is not allowed, such as in a hospital). The removable Canon LP-E6 battery offers 36 continuous hours of run time. It also includes (3) 1/4"-20 UNC mount points.

RT Motion MK3.1 Lens Motor

The RT Motion MK3.1 Lens Motor is the world's first brushless vector drive lens motor, with smooth and quiet operation, faster response, a high-resolution encoder, no cogging, no sparking, and 4x the service life of brushed motors. Use with any RT Motion Receiver for reliable, precision control of your cinema and still lenses.

Features:

• Fast, accurate, powerful, smooth, and quiet
• 2.2 Nm max. allowable torque
• Includes 15mm/19mm rod bracket, with height adjustment
• Includes 0.8 Mod drive gear (also available in 0.4, 0.5, 0.6 and 0.8 Wide)
• Adjustable motor response from silky smooth to quick & sharp movement
• Unique, adjustable compensation for zero-backlash and perfect accuracy, even on worn lenses
• Drive gear can be mounted on either side
• Lightweight & compact design
• Dimensions: 4.5" x 1.6" x 1" (115mm x 40mm x 26mm)
• Weight: 0.46 lb (212 g)
• Strong, thin, and flexible 3mm cables (sold separately) allow for reduced weight, less strain, and easier routing
• LEMO-style 0B 4-pin input connector (motor bus socket)
• Accepts 5-17V DC power input

RT Motion White Marking Disc

The RT Motion White Marking Disc is designed for use on the RT Motion MK3.1 Controller. China Markers are recommended for easy cleaning, though permanent markers may also be used (the disc can be safely cleaned with isopropyl alcohol to remove permanent marker).

RT Motion DSMC2 Cheeseplate (6131)

This Cheeseplate fits onto your RED DSMC2 body's Sidekick Slot. It also fits directly on the MDR-SK DSMC2 module.

RT Motion System Case

This hard transport case is waterproof, dustproof, and includes a pressure valve. The interior cut foam insert features slots for your (3) motor FIX setup accessories. Will accommodate your motors and receiver stored with brackets on to save you time.