ARRI Battery Hanger 2 (Includes 19mm Rods)

The Battery Hanger Module Gen.2, BHM-2 is a future-proof, high-performance power supply for ARTEMIS and TRINITY camera stabilization systems. Regardless of the batteries used, whether 12 V or 24 V, the BHM-2 always supplies 12 V and 24 V for the camera and the accessories as required. If 12 V batteries are used, 24 V will be transformed from the 12 V, should 24 V power be required. It works the same way if only 24 V batteries are connected, then the needed 12 V power supply is down-transformed from the 24 V. With the BHM-2, up to three batteries (V-Mount, B-Mount and Gold Mount) can be connected to the BHM-2 and their power can be bundled. Since all batteries always work together, the intelligent battery management enables extremely long runtimes for the entire system, even with high consumption. This means that even very small and light batteries can be used, without having to worry about the overall life of the batteries. If the Battery Hanger Module BHM-2 is used with a TRINITY 2, the BHM-2 always supplies the necessary 24 V for the motors and at the same time 12 V for the control electronics.

NOTE
Upgrade for artemis Gen.1 when using BST-1 (K2.0039977) Upgrade for TRINITY Gen.1 when using TST-1 (K2.0039687)

For ARTEMIS 2, TRINITY 2 and artemis Gen.1 and TRINITY Gen.1 after adding other components

Included in set

• K2.0037739, BHM-2, Battery Hanger Module, Gen.2
• K2.0037771, Power Cable, BHM-2 to TST, 12 V, 24 V, Bat. Data
• K2.0041327, Support Rods 305 mm/12", 19 mm
• K2.0040790, Support Rods 120 mm/4.7", 19 mm
• K2.0037757, Hinge for Battery Hanger Module, Gen.2, 19 mm

Power Cable, BHM-2 to TST, 12 V, 24 V, Bat. Data

High-capacity 12 V/24 V power cable to connect the Battery Hanger Module with the Top Stage or Bottom Stage Gen.2.
Lemo 2B 7-pin to Lemo 2B 7-pin, 12 V/24 V 

Support Rods 305 mm/12", 19 mm

1 pair of 19 mm carbon rods
Length: 305 mm/12", Diameter: 19 mm

Support Rods 120 mm/4.7", 19 mm

1 pair of 19 mm carbon rods
Length: 120 mm/4.7", Diameter: 19 mm

Hinge for Battery Hanger Module, Gen.2, 19 mm

The newly developed 19 mm hinge allows even more precise positioning of the batteries thanks to the finer ARRI rosette. And as soon as the hinge is locked, the batteries are held securely and without any play or vibrations. It is also possible to use two hinges on the ARTEMIS 2 and TRINTY 2. This allows the batteries to be positioned even more freely and creatively.  For ARTEMIS 2, TRINITY 2