The HyperDeck Studio bypasses the camera's compression and records from SDI and HDMI direct into the highest quality uncompressed video, enabling editing directly from the SSD media. This single rack unit, measuring less than 4 inches deep, fits easily into an outside broadcast van or master control room.
The unit records onto a 2.5” solid state disk, eliminate complicated and expensive disk arrays, and SSDs can easily handle shocks and vibrations that would destroy conventional hard drives or videotapes. It captures universally compatible uncompressed QuickTime files that can be used with all popular software packages like Final Cut Pro, Premiere Pro, After Effects, Resolve and Apple Color.
The familiar VTR style design provides function buttons, function control, a knob for jog and shuttle, plus an external RS-422 control. The Hyperdeck Studio can also be connected to a projector or television via the HDMI or SDI outputs, or you can edit directly from the SSD with no digitizing or file copying by plugging the SSD into a laptop or desktop via a standard external eSATA dock. Chain several units together via the SD/HD-SDI loop to record multiple copies simultaneously. HyperDeck Studio also comes standard with a USB connection for firmware updates and settings.
Connections
SDI Video Input
1 x 10-bit SD/HD/3 Gb/s SDI switchable
SDI Video Output
2 x 10-bit SD/HD/3G Gb/s SDI switchable.
1 x 10-bit SD/HD/3 Gb/s SDI switchable Loop Output
1 x 10-bit SD/HD/3 Gbs/SDI switchable Monitor Output
HDMI Video Input
1 x HDMI 1.3 type A connector
HDMI Video Output
1 x HDMI 1.3 type A connector
SDI Audio Input
16 Channels embedded in SD and HD
SDI Audio Output
16 Channels embedded in SD and HD
HDMI Audio Input
8 Channels embedded in SD and HD
HDMI Audio Output
2 Channels embedded in SD and HD
SSD Interface
2 x 2.5" SATA 3Gb/s
Computer Interface
1 x Mini-B type USB 2.0 connector for initial setup, firmware updates and HyperDeck Utility software control
Sync Input
Blackburst or Tri-Sync
Device Control
Sony compatible RS422 deck control port
Recorder Control
12 buttons and jog wheel for local control of HyperDeck Studio or use either RJ45 Ethernet or USB 2.0 high speed interface
Recorder Configuration
Use USB 2.0 high speed interface
Standards
SD Format Support
625/25 PAL and 525/29.97 NTSC. 480p60 and 576p50 via HDMI only
