The BrightEye 10 Optical-SDI to Analog-SDI Converter from Ensemble Designs is a device that converts either SDI (electrical) or fiber optic inputs to Beta or SMPTE component, RGB, and composite (with simultaneous Y/C) outputs. Processing, encoding, and conversion are performed digitally at 12-bit resolution with 8X oversampling.
Front-panel controls allow you to select the input source and format, as well as adjust video gain. Video levels can also be adjusted through the BrightEye software package that is included with the unit and compatible with both Windows and Mac operating systems.
Note: Please note that a power supply is not included with the unit and must be purchased separately.
SERIAL DIGITAL INPUT
Quantity: x1
Signal type: 270Mb/s SD serial digital (SMPTE 259M)
Impedance: 75Ω
Return Loss: >15dB
Maximum cable length: 984ft (300m)
OPTICAL INPUT
Quantity: x1
Type: SD (SMPTE 297M, optical equivalent of 259M)
Wavelength: 1310nm
Receiver sensitivity: –18dBm
Maximum length: 20km
Fiber type:
Single Mode
Multi-mode compatible with 8 dB attenuation at transmit end
Connector: SC
Outputs
ANALOG OUTPUT
Quantity: x1
Type:
Beta/SMPTE, Y, Pr, Pb
RGB
NTSC, PAL Composite
NTSC, PAL S-Video
Return Loss: >40 dB
Output: DC None (AC coupled)
SERIAL DIGITAL OUTPUT
Quantity: x1
Type: 270Mb/s SD serial digital (SMPTE 259M)
Impedance: 75Ω
Return loss: >15dB
Output: DC <50mV
Conversion
SDI-to-ANALOG PERFORMANCE
Bit resolution:
12-bit output reconstruction
8X oversampling
Signal to noise: >65dB
Frequency response: ±0.1dB, 0 to 5.5MHz
K Factor: <1%
ScH phase error: <±2°
Differential phase: <1°
Differential gain: <1%
Power
12V, 7W
*100 to 230VAC modular power supply not included
Dimensions
(W x D x H)
0.8 x 5.625 x 5.5" ( 20 x 143 x 140mm)
Weight
Not specified by manufacturer
Thank you for your interest in the BrightEye 10 Optical/SDI to Analog/SDI Converter.
You can either call our offices on -
NYC 888.223.1599 • CHI 877.880.4267 • LA 888.700.4416
Or you can email us using this form and someone from our sales department will contact you shortly.
Fields in red are required, however, the more details you provide the better we can assist you.
