Overview
The ARRI TRINITY Rig Pro Set Gold mount is a five-axis stabilizer system combining a two-axis, ring-style camera gimbal with a classic mechanical stabilizer. The TRINITY Rig can be used with ARRI ALEXA, ALEXA Mini/LF, AMIRA, 235 and 416 film cameras, TV box cameras, and similarly sized camera rigs from other manufacturers weighing up to 66 lb. This 24V upgrade rig has two separate power lines with the CAM Power Out port on the TRINITY ring offering 12V high capacity or 24V power for your camera. Use this combo stabilizer to create wide-ranging, revealing shots with high-to-low or vice versa moves. When held at a 45° angle and twisted left or right, TRINITY can even be used to peek around corners.
Movements may be extended using the joystick-controlled, fully stabilized tilt axis; the TRINITY's tilt axis may be locked when a more traditional stabilizer mode is desired. An optional wireless remote is available separately for tilt and roll control. Setup is fast and easy thanks to a modular design and cross-compatibility with components like ARRI's SAM-1/2/3/4 plates. A pendulum on the battery hanger enables smooth drop-down movements from any angle. The TRINITY's detachable, carbon fiber center post extends from approximately 17-28" and offers 0.86" of fine trim.
Up to four long-lasting Gold mount batteries can be attached to TRINITY, offering time-saving hot-swapping ability. TRINITY's high-capacity 12/24V wiring accommodates a wide range of cameras and provides power for video, focus systems, and accessories including the LBUS cforce mini RF lens motor.
Specifications
ARRI Transvideo StarliteHD5-ARRI 5" OLED Monitor With ARRI Bus Interface Specifications
|
VIDEO IN |
3G/HD/SD-SDI: 1 x BNC |
|
VIDEO OUT |
3G/HD/SD-SDI: 1 x BNC (reclocked) |
|
SUPPORTED VIDEO STANDARDS |
3G: |
|
RECORDING CODEC |
H.264 |
| DISPLAY PANEL | 5" AMOLED Touchscreen |
| PIXELS | 1280 x 720 |
| CONTRAST RADIO | 3400:1 |
| VIEWING ANGEL (H x V) | ±80 x 80° |
| BRIGHTNESS | 380 cd/m² |
| COLOR TEMPERATURE | D56 |
| SD CARD REQUIREMENTS |
Type: SDSC/SDHC/SDXC Maximum Size: 128 GB File Format: FAT32 Speed Class: 10 |
| POWER INPUT | 6-30 VDC, 5-pin LEMO-type |
| POWER CONSUMPTION | 6 W |
| BATTERY TYPE | Sony L-series |
| MATERIAL OF CONSTRUCTION | Machined Aluminum |
| MOUNTING THREAD | 1/4" - 20 |
| DIMENSIONS | 5.67 x 2.68 x 1.06" / 144 x 68 x 27 mm |
| WEIGHT | 7.1 oz / 200 g |
ARRI TRINITY Power GPI, LEMO 1S 3-Pin To 1S 3-Pin 90° Cable Specifications
| CONNECTOR 1 | 3-Pin LEMO, Straight |
| CONNECTOR 2 | 3-Pin LEMO, Right Angle |
What's in the Box
- Foam Insert for Pelican 1615 Air Case
- Cam Power, Cine, 12V, XLR, HiCap Cable
- Post Tool for artemis and TRINITY
- TRINITY Power Cable, D-Tap to 1S 3-Pin
- TRINITY Joystick Monitor Mount
- ARRI BNC Video Cable / HD SDI / 4.5 GHz
- ARRI Cam Power / Cine / 12V HiCap / ALEXA Mini
- ARRI Cam Power / Cine / 12V HiCap / ALEXA
- Arri 2 mm Hex Key
- Arri 1.5 mm Hex Key
- ARRI artemis Docking Bracket 1.8“
- ARRI TRINITY PWR, Lemo 1S 3pin to 1S 3pin 90°
- ARRI TRINITY Power Cable LEMO 1B 4-Pin to LEMO 1B 4-Pin
- ARRI TRINITY Battery Mount - Gold Mount
- Hard Carrying Case
- Microfiber Pouch
- SD Card (Class 10)
- Transvideo Mini 3D Swing Arm for ARRI Camera
- Transvideo 4.5 GHz 3G-SDI BNC to BNC Cable (3.3')
- ARRI Cable StarliteHD5-ARRI EXT (Straight)
- 5" Transvideo StarliteHD5 OLED Monitor/Recorder with ARRI Bus Interface
- ARRI 24V Upgrade for TRINITY
- ARRI TRINITY Rig
- Foam Insert for SKB 3i-2317-14BE
Specifications
Key Highlights
- 5-Axis Hybrid Camera Stabilizer
- 24V or Hi-Capacity 12V Camera Power
- For ALEXA/Mini/Mini LF/AMIRA Cameras
- Transvideo StarliteHD5 OLED Monitor
