Core SWX FLEET-DM2S Fleet Micro Digital Simultaneous Dual Charger - V-Mount

The Core SWX FLEET-DM2S Fleet Micro Digital Simultaneous Dual Charger - V-Mount offers a complete battery management system for your battery “Fleet,” including an onboard LCD to monitor intelligent battery data. In addition to being the fastest battery charger in the industry today (four 98Wh packs in under 2.5 hours), this charger offers a test mode to determine battery health and recharge performance. With the inclusion of a micro USB port on the rear of the unit, that data can then be viewed and managed via a PC application. The micro USB port doubles as an input for future free firmware upgrades (downloadable via the web). 

In addition to battery management, Fleet Micro charger includes SafeFly mode.  With one touch of the onboard membrane-button console, the charger will either charge the connected packs up to 30% or discharge to under 30%, depending on current state of charge of connected batteries. One-touch operation allows you to quickly prepare all packs for air travel or shipment. This feature can also be applied to a single connected pack.

The Fleet Micro series is cross-compatible, able to charge not only Core SWX battery packs, but also those offered by RED, Anton/Bauer, and more. Compatibility provides peace of mind that whether you’re on location with multiple crews, charging legacy packs, or building your rental fleet, the Fleet Micro has you covered.

This charger includes a 90W, 4-pin XLR power supply, compatible with most cameras. In addition to the onboard power supply, the charger doubles as a battery bank when in “Hypercine” power supply mode (unregulated, 12-16.8V DC). The charger parallels all onboard battery packs to provide continuous power, and the charger’s LCD reports back available capacity as well as remaining runtime. 

NOTE: With the optional “Hypercine module” (sold separately), the charger provides both unregulated 12-16.8V 4-pin XLR, as well as 28V regulated 3-pin XLR DC outputs.

Features:

• Quick Charge Current: 3 Amp, simultaneous
• Discharge Current: Up to 2A per channel
• Dimensions: 9.1” x 3.35” x 6.57”
• Weight: 1.8 lb
• Input Voltage: 90-240V AC, 50/60Hz
• 4×20 Character Backlit LCD

IMPORTANT NOTE: Batteries sold separately.