Overview
With the Teradek Bolt 1500 12G-SDI/HDMI Wireless RX Gold-Mount, you can receive visually lossless 4K60 video signals from any Bolt 4K transmitter with less than 1 ms of latency and send them out two 12G-SDI outputs or one HDMI output. The receiver unit can be secured to a camera or other SDI/HDMI video source via built-in 1/4"-20 or 3/8"-16 threaded holes. The five included antennas provide a powerful signal that can receive from up to a 1500' line of sight.
The receiver supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.
Power can be provided using the integrated 2-pin connector or by using the Gold mount plate and a separately available battery. A Bolt 4K transmitter supports up to six receivers, and it can operate up to six transmitters with receivers in the same area with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange to protect your video from prying eyes.
- Two 12G-SDI outputs and one HDMI output
- 1500' line-of-sight range
- Compatible with any Bolt 4K transmitter
- Up to 48 kHz 24-bit PCM embedded audio supported
- SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
- 1/4"-20 and 3/8"-16 mounting points
- 2-pin LEMO-type power input
- Built-in display with joystick navigation
- Micro-USB port for upgrades
What's in the Box
- Gold Mount Battery Plate
- Box with Foam
- 2 x Flathead Screw
- 5 x Antenna
- 30W Power Supply with 6' Cable
- 12G-SDI BNC Cable (18")
- USB Type-A to Type-B Cable (3')
- 2-Pin to D-Tap Power Cable (18")
- HDMI Type A Cable (18")
- 2 x Bolt 4K Wire Cover Plate (Machined Anodized)
- Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Receiver with Gold Mount Battery Plate
Specifications
Key Highlights
- Two 12G-SDI outputs
- One HDMI output
- 1500' line-of-sight range
- Compatible with any Bolt 4K transmitter
- 1/4"-20 and 3/8"-16 mounting points
- 2-pin LEMO-type power input
- Built-in display
- Micro-USB port for upgrades
