icon account icon cash icon cart icon cart icon search main arrow arrow check icon camera icon light icon audio icon computer icon storage icon discount icon facebook icon twitter icon linkedin icon vimeo icon youtube icon instagram icon google plus icon share icon email icon print icon time icon phone icon email-m icon marker-m icon pdf icon remove icon comment icon out icon-status icon-star icon-switch pie-chart line-chart icon-user icon-user-1 icon-warning expand-arrow-1 expand-arrow-2 icon-upload icon-download icon-none icon-date-scheduled icon-date-available icon-is-hazardous
Header image for article Quick Tip: AJA Ki Pro Mini Remote Access

Quick Tip: AJA Ki Pro Mini Remote Access

The AJA Ki Pro and Ki Pro Mini recorders both offer an ethernet user interface that can be displayed on a computer desktop.

The computer interface provides full unit control (including transport and playlist creation) and is also the method by which you apply firmware updates. I'm using my MacBook Pro for this demo, but you can use any computer with an ethernet port and web browser. Watch my video above for a step-by-step tutorial, or continue reading for a written guide.

  1. Connect your KiPro to your computer via an ethernet cord (RJ45, straight-through or cross-over are both supported).
  2. Press the Configure button on the Ki Pro, navigate to menu 50.1, and set the IP Config to Static Address. The Ki Pro has support for DHCP, but we're going to use a manual IP address since it simplifies the type of connection we're making.
  3. In menu 50.2, you'll see the IP address for the Ki Pro. You can change this if you wish, but remember the IP address.
  4. Toggle to Menu 50.3 and note the Subnet Mask.
  5. On your computer, navigate to your network settings (in System Preferences on your Mac, or Control Panel in Windows).
  6. Select the ethernet interface (IPv4).
  7. Make sure that your DHCP settings are set to manual IP address.
  8. Type in an IP address that is slightly different from the Ki Pro IP address. For example, the IP address of my Ki Pro was, so I set my computer to
  9. Type in the Subnet Mask that is in Menu 50.3 of the KiPro.
  10. To communicate with the Ki Pro, open a web browser of your choosing and type in the IP address of the Ki Pro. Hit return and the user interface for the Ki Pro is now on your desktop!
Ian McCausland
Technology Specialist, AbelCine LA

Related Products


Intro image for article Using the C300 with the AJA Ki Pro Mini
Tutorials & Guides
Recently, a colleague of mine asked about how to set up the Ki Pro Mini for use with the Canon C300. With the latest firmware (v3.0), the Ki Pro Mini can be triggered to record via the C300, as well as record in 24p (23.976 to be exact).