ARRI ALEXA Mini LF Advanced Accessory Set - 15mm Studio

The ARRI ALEXA Mini LF Advanced Accessory Set - 15mm Studio features comprehensive support accessories for the ALEXA Mini LF, enabling varied operating configurations, such as handheld, lightweight gimbal stabilizers, and stabilizer systems like the MAXIMA and Trinity, in addition to standard 15mm Studio and LWS configurations.

NOTE: This set does not include a power source or power distribution accessory.

The ARRI MAP-1 Lightweight Adapter Plate for the ARRI ALEXA Mini Camera offers centered threads and an interface for both the ALEXA Mini side bracket MSB-1 and the Rod Mounting Bracket RMB-3. Weighing only 84 g, this plate is ideal when building a mini rig or using a gimbal. It fits on either the top or bottom of the ALEXA Mini or Mini LF camera.

NOTE: If you use the MAP-1 ARRI Lightweight Adapter Plate on the top of your camera you can pair it with an ARRI Center Camera Handle CCH-2.

The ARRI Stabilizer Plate for CBP allows the Compact Bridge Plate to convert to a Stabilizer Adapter Mount for ALEXA Mini (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.

The ARRI 3.5" (90mm) Single Support Rod - 19mm is made from lightweight stainless steel, measuring 3.5" (90mm) in length, with a diameter of 19mm.

The ARRI 5.9" (150mm) Single Support Rod - 19mm is made from lightweight stainless steel, measuring 5.9" (150mm) in length, with a diameter of 19mm.

The ARRI 15mm LWS Adapter for CBP adds a 15mm lightweight support rod console to the 19mm Studio CBP-1 or the 15mm Studio CBP-2 bridge plate for the ARRI ALEXA Mini camera.

The ARRI BAP-2A Battery Adapter Plate is a side-mounted battery plate that is compatible with the  CBP-1 and CBP-2 Compact Bridge Plates. The BAP-2A features mounting interfaces to common battery plates, including the ARRI Power Splitting Box and Bebob AMICRO and VMICRO (sold separately).

NOTE: Backwards compatible with ALEXA Mini.

The ARRI HEB-3 Handle Extension Block will lengthen and expand your Center Camera Handle, or any 3/8"-16 UNC threaded mounting point. It is approximately 4.64" (118mm) in length. Features (3) 3/8"-16 UNC threaded mounting points. 

According to ARRI, when attached to the front of a Center Camera Handle (CCH-1), the tape hook is aligned exactly with the sensor plane.

The ARRI SAB-1 Side Accessory Bracket attaches to MAP-1 and MAP-2 Mini Adapter Plates, the Broadcast Plate for ALEXA Mini, or CBP-1 Compact Bridge Plate. The SAB-1 provides standard ARRI 3/8"-16 and 1/4"-20 accessory threads, as well as attachment points for the RMB-3 Rod Mounting Bracket and MSB-1 Mini Side Brackets.

The ARRI 15mm Reduction Insert can be fitted to any 19mm rod mount to allow compatibility with 15mm rods.

The ARRI Bottom Dovetail Plate - 12" (300mm) is a standard balance plate designed as a mounting platform for your ARRI bridge plates.

The ARRI RAB-1 Rear Accessory Bracket offers flexible attachment options for use of accessories such as modern battery solutions on the ARRI ALEXA Mini LF and the ALEXA Mini Camera. Features 1/4"-20 and 3/8"-16 threaded mounting points and captive mounting screws.

An RAB-1 Clamp (K2.0014126) is also included for attaching an ARRI Power Splitting Box Mk II (sold separately); the clamp attaches directly to the rear face of the RAB-1 via captive screws.

The ARRI Mini Adapter Plate MAP-2A fits your ARRI ALEXA Mini and the ARRI ALEXA Mini LF on the top of your camera or as a baseplate. The MAP-2A features an improved rod clamping mechanism.

Ideal for small camera rig scenarios, the MAP-2A includes 3/8-16" & 1/4-20" accessory mount points and 15mm rod ports. It includes an integrated 15mm LWS rod console to allow 15mm lightweight rods to pass through from front to back.

The ARRI Mini Side Bracket MSB-3 for ALEXA Mini and Mini LF is designed to fit securely around the onboard recorder and the viewfinder connector (camera left) of the ALEXA Mini LF. It is also backwards compatible with the ALEXA Mini camera body.

The ARRI MSB-2 Mini Side Bracket offers support for lens motors in configurations that require lightweight baseplates with no rod support, such as lightweight stabilizer systems or drones. Features (1) parallel 19mm tube/rod clamp with compact ratcheting kip handle, multiple 3/8"-16 threaded mounting points, and (1) ARRI rosette accessory mounting point. Attaches to ALEXA Mini MAP-1 or MAP-2 Top/Bottom Adapter Plates via captive mounting screws.

The ARRI AMIRA Power Cable Straight (KC-50) connects your ARRI AMIRA or ALEXA Mini LF or ALEXA Mini power input to a battery power outlet with an XLR 3-Pin Connector. This cable is 6.6' (2m) in length.

The ARRI CBP-2 Compact Bridge Plate for ALEXA Mini - 15mm Studio is ergonomically designed to be comfortable on the shoulder, sturdy on the dolly, and extremely versatile, with a unique top-mount system enabling the bridge plate to be swiftly attached to industry-standard balance plates. The CBP-2 is the 15mm Studio equivalent to the CBP-1 19mm Studio bridge plate (not included). 

The ARRI RAB-1 Clamp 2 for ALEXA Mini LF offers a strong and reliable connection to the Rear Accessory Bracket RAB-1 (included) on your ARRI ALEXA Mini LF Camera. The Clamp 2 features a safety lock to prevent your battery plate dismounting unintentionally.

Attach the ARRI CCH-2 Center Camera Handle to your ARRI ALEXA Mini LF, ARRI ALEXA Mini, Classic ALEXA M, AMIRA, or other cameras equipped with ARRI Pro Camera Accessories (PCA). Requires a MAP-1, MAP-2, or a MAP-2A adapter plate. The CCH-2 Handle can connect to SONY F5/55 cameras using a top cheeseplate.

This handle not only offers a grip, so you can carry your ALEXA Mini, it also provides added attachment points for mounting accessories. The handle includes 3/8"-16 UNC threaded mount points for your use.

Secure the ARRI Center Camera Handle to the adapter plate with the (4) included screws and the adapter plate to your ARRI ALEXA Mini LF, ARRI ALEXA Mini, ALEXA M or AMIRA camera.

The ARRI MVB-1 Viewfinder Mounting Bracket provides a mount to secure your ARRI MVF-1 Viewfinder to the ALEXA Mini camera system or the ALEXA Mini LF camera (sold separately). It allows the operator to position the EVF in multiple orientations to avoid obstructions.

The ARRI Rod Mounting Bracket (RMB-3) offers support for a single 19mm rod. It also provides mounting solutions for accessories, such as optional lens motors or your lightweight viewfinder mounts. Includes a locking lever to hold your rod in place once it slides into the bracket.