Wooden Camera Unified Baseplate for Sony Venice, URSA Mini, Sony F5/F55

Wooden Camera Unified Baseplate for Sony Venice, URSA Mini, Sony F5/F55 provides a quick release baseplate support with ARRI dovetail interface on the bottom. 2x 15mm LW rod ports run through the Baseplate from front to back to accommodate your mattebox, lens support hardware, or other camera accessories for your Sony VENICE camera, Blackmagic URSA Mini, Sony F5, or Sony F55 Camera. A set of 2x locking thumbscrews on each side secures the rods in place.

Baseplate features a releasable top for separating camera from the 15mm lightweight rod system so you can switch quickly from tripod or shoulder mounted rig to a handheld rig.

Includes:

• 2x 1/4-20 low profile screws
• 2x 3/8-16 low profile screws

Features:

• Upper dovetail based on ARCA Swiss dovetail shape
• Vertical 15mm rod hole for optional support posts, ideal for your lens adapters like Metabones, etc.
• Pass through 15mm lightweight rod openings with 2x locking thumbscrews per rod
• Lower dovetail based on ARRI standard dovetail shape
• 1/4-20 and 3/8-16 holes for attaching to tripod plates and Bridgeplates

To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body.

The bottom of the baseplate is comprised of the Lower Quick Dovetail which features 1/4-20 and 3/8-16 threaded holes for attaching to your tripod plate or ARRI standard bridgeplate such as your Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio). To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any of your 2060 Dovetails, Safety Dovetails, or Shoulder Rigs.

For VCT-14 compatible mounting options, the Unified Baseplate can be attached to your Unified VCT Wedge Plate, providing easy counterbalance ability while on the shoulder. This could then be attached to your Unified VCT-14 Tripod Plate which would be attached to the tripod head.

• Dimensions: 2.0 x 6.0 x 6.0" (50.8 x 152.4 x 152.4 mm)
• Weight: 0.8 lb (362.8 g)

NOTE: Rods, camera and other accessories are not included.