ARRI Encoded ARRIHEAD 2 with Position Sensors for ARRIMOTION

The ARRI Encoded ARRIHEAD 2 with Position Sensors for ARRIMOTION is equipped with position sensors on the main pan gear and on the left rail of the tilt mechanism, and features three sensors for the three locks. The ARRIHEAD-2 is designed for current film and digital cameras, with a tilt axis centered on the camera's optical center.

Features: 

• Encoders in the pan and tilt mechanisms provide higher precision in position detection (easier and more accurate homing)
• Automatic lock detection
• Automatic gear check during homing
• Automatic detection of CHM-1 motors
• Automatic identification of the ARRIHEAD-2
• Compatible with ARRI bottom plates and other touch-and-go systems
• Tilt angle +/- 30° without wedge plate; +/-90° with wedge plate
• Selectable 3-speed gears, plus neutral
• Max load 110 lb (50 kg)
• Standard Mitchell base
• Set of reduction gears (ratio 1:5) available for tilt and pan (sold separately); contact an AbelCine salesperson for details

Connecting an ARRIHEAD-2 with Encoders to the ARRIMOTION system:

• Use cable K-ARRIH-MCB (not included) to connect the connector on the Encoded ARRIHEAD-2 to the ARRIHEAD connector on the MCB-1 closest to the CCB-1
• The head will be automatically identified when the ARRIMOTION system is turned on; the other features will be activated during homing (automatic lock detection, home marking, automatic gear check)