- (1) Wireless FIZ Hand Unit
- (2) Brushless Wireless Motors with 19mm Rod Support & 15mm Rod Adapters
- (1) Right Wireless Handle
- (1) Finger Wheel
- (1) Zoom Toggle
- (1) Left Wireless Handle
- (1) Finger Wheel
- (4) Follow Focus Marking Disks
- (1) 7-Pin to P-Tap Motor Power Cable - 29" (74cm)
- (1) 7-Pin to 7-Pin Motor Connection Cable - 12" (31cm)
- (1) 7-Pin to 7-Pin Motor Connection Cable - 7" (18cm)
- (2) Photographic Lens Follow Focus Adapters
- (1) 18650 Quad Battery Charger (batteries not included)
- (2) Handle to ARRI Standard Rosette Adapters
- (2) Handle to Gimbal Bar Adapters (compatible with 25mm/30mm rod diameters)
- (1) Wireless FIZ Hand Unit Strap
- (1) Hard Shell Waterproof Safety Case
Overview
Overview
This system includes the following items:
The Tilta Nucleus-M 2-Axis Wireless Lens Control System is a highly customizable wireless lens control system, supporting up to three channels (axes). The Nucleus-M allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or via its two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. Camera record run/stop control is also possible with an optional cable (sold separately) for your specific camera system, connecting a free LEMO 7-pin port on one of the motors to your camera's RS port.
The wireless range of both the hand unit and hand grips is 1,000' (with an optional upgrade, the range can increase to a maximum of 1.25 miles). This makes it ideal for drone or car-mounted shots.
The hand grips can be attached to the included ARRI-style rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters, or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters (sold separately).
Each motor features its own integrated motor driver that communicates directly with the hand unit and hand grips. This eliminates the need for a separate MDR, enabling a more compact camera rig requiring less setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration (default), if you are using lenses that do not have hard end stops at close focus and infinity.
Each motor is designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your rig. Each motor includes a cinema standard 0.8 Mod, 35 Tooth, 32 Pitch drive gear.
Nucleus-M motors feature a "daisy chain" design, requiring only one power port on your camera rig. Simply connect the included P-Tap power cable from your accessory power port to the first motor, then daisy chain power to the rest of the motors with the included short 7-pin to 7-pin cables.
The hand unit and hand grips are each powered by (2) 18650 rechargeable batteries (sold separately). When fully charged, the batteries in the hand grips last up to two days, while in the hand unit they last up to 10 hours.
What's in the Box
- Hard Shell Waterproof Safety Case
- Wireless FIZ Hand Unit Strap
- 2 x Handle to Gimbal Bar Adapters
- 2 x Handle to ARRI Standard Rosette Adapters
- 18650 Quad Battery Charger
- 2 x Photographic Lens Follow Focus Adapters
- 7-Pin to 7-Pin Motor Connection Cable - 7" (18cm)
- 7-Pin to 7-Pin Motor Connection Cable - 12" (31cm)
- 7-Pin to P-Tap Motor Power Cable - 29" (74cm)
- 4 x Follow Focus Marking Disks
- Left Wireless Handle
- Right Wireless Handle
- 2 x Brushless Wireless Motors with 19mm Rod Support & 15mm Rod Adapters
- Wireless FIZ Hand Unit
Specifications
Specifications
Key Highlights
- 2-Axis Lens Control System
- Supports up to (3) channels
- Up to 1000' (304m) range
- Includes (2) brushless motors
- Includes Wireless Hand Unit
- Includes Wireless Left & Right Grip
- Includes motor power cables
- Includes hard case
Bags & Cases / Covers
Bag & Case Inserts:
Product-Specific Insert(s)
Weather Protection:
Water-Proof
Bag Physical Type:
Hard Case
Battery Accessories
Charger Bay Count:
4 Batteries
Accessory Type:
1 x Battery Charger - For compatible 18650 batteries with a raised anode (positive) terminal (sold separately)
Connectors
Output Connector/Port:
1 x LEMO 7-pin - Motor
Input Connector/Port:
1 x LEMO 7-pin - Motor
Mechanical & Electronic Controls
Gear Ratios:
0.8 - Mod, 35 - Tooth, 32 - Pitch
Rod Standard:
15mm
19mm
Mechanical Options:
2 x Motor
4 x Marking Ring - White
2 x Motor Clamp - 19mm
Neck Lanyard
2 x Reduction Insert - 19mm to 15mm
2 x Rosette Adapter
2 x Gimbal Bar Adapter
2 x Photographic Lens Follow Focus Adapters
Electronic Options:
Wireless - Hand Unit, Left Grip, Right Grip
Record Run/Stop - via LEMO 7-pin to Camera RS port accessory cable (sold separately)
Controls Include:
Focus, Iris, Zoom
Power
Input Voltage:
100-240V AC - 50/60 Hz (Battery Charger)
Wireless
Wireless Range:
Up to 1,000 feet - 304m
Recommended Products
All Categories
