Noga Cine Pro Set

The Noga Cine Pro Set includes the following items:

• Mid-sized Noga Cine Arm (DG9014CA)
• Quick Release (NOGA-AD4200) with a male 1/4"-20 threaded top and female 1/4"-20 thread on the bottom
• Xchange Cube (NOGA-AD1141) offering 1/4"-20 to 1/4"-20, 1/4"-20 to 3/8"-16 and 3/8"-16 to 3/8"-16
• Converter (NOGA-AD2300) with a female 1/4"-20 to male 3/8"/16 threads

The Noga DG Hold-It Cine Arm - Medium is a 10.7" articulating arm supporting payloads up to 10 lb (4.5 kg). It features a single central locking joint which simultaneously locks or releases all articulation points via one Kip Lever. The arm includes equal length on both sides of the central knuckle for increased strength and resistance.

Noga arms are known for ease of use and compatibility with a wide range of camera accessories. Attach the arm via standard 1/4"-20 threads and position to the left or right of the lens. You can raise or lower, or tilt the arm up or down to find the precise angle needed.

Features:

• Top: 1/4"-20 Screw, Nut
• Bottom: 1/4"-20 Screw
• Weight: 1.5 lb (680g)
• Maximum Payload Capacity: 10 lb (4.5 kg)

The Noga Quick-Release Adapter with 1/4"-20 Male top and 1/4"-20 Female bottom threads is a pull-to-release adapter that replaces the standard 1/4"-20 thread mount on the top of all Cine Arms. It allows for quick and easy mounting and dismounting of accessories on the Cine Arms. The adapter utilizes a 1/4"-20 male thread with non-slip rubber surface for mounting accessories like monitors, lights, et al. You can easily mount the preloaded accessory to the arm by pulling back the release sleeve on the adapter and inserting in the accessory.

The Noga XchangeCube features a six-sided design offering one threaded hole on each side, adapting 1/4"-20 to 1/4"-20, 1/4"-20 to 3/8"-16, and 3/8"-16 to 3/8"-16. Constructed from lightweight aluminum with a compact, portable design, this accessory is right at home in any AC or operator's kit.

Features:

• (3) 1/4"-20 threads (female)
• (3) 3/8"-16 threads (female)

The Noga Converter features 3/8"-16 female to 1/4"-20 male threads.